Own business for the production of shoe covers. Equipment for the production of shoe covers Production of quality shoe covers

26.03.2021

In a period of increased competition and a decrease in the purchasing power of the population, it becomes quite difficult to organize a new production or upgrade worn-out equipment at an already functioning plant. European machine tool manufacturers, focusing on global price increases, raise the cost every month. And the economic crisis due to fluctuations of the ruble against the dollar and, accordingly, the yuan makes its own significant adjustments and makes it impossible to draw up reliable business plans that help to understand the profitability of work and the length of the payback period of the enterprise.

A completely different situation in the markets of the East. The equipment for boot covers offered to manufacturers in China costs much less than their counterparts from Italy or Germany. Competitive price, high quality, shortened delivery time - this is an incomplete list of benefits offered to customers cooperating with STA SiberiaTransAsia.

Buy equipment for the production of shoe covers directly from the owners of the factory in China - our offer, which cannot be refused. The final price of the machine - 12 500 USD USA! Lead time from order to receipt of purchase 30 days! No one will deliver faster and cheaper!

Cost recovery speed and profit start

For those who first thought about ways to earn money with small investments and a rapid payback, it is necessary to consider the possibility of opening a small or large (depending on financial capabilities) shop for the manufacture of shoe covers.

One machine for the production of shoe covers - subject to full load - fully pays off and begins to bring net profit in six months. The costs of a workshop of several dozen machines will return a little faster if the sale of manufactured products takes place as quickly as the release.

The most expensive item in the business plan for the manufacture of shoe covers is the purchase of equipment. Several hundred dollars, by which the price of one machine from Europe or China can vary, can significantly affect the time for compensating investments. We, as intermediaries between Chinese manufacturers and you, will not only offer the lowest amount, but also speed up the time the purchase arrives on the territory of your enterprise.

Every day of downtime is golden minutes that go away forever. Buy equipment for the production of shoe covers from China with our help, and start making a profit in a month!

Equipment for shoe covers - organization of the production process

Equipment for the production of shoe covers does not require a large staff of service employees. The sole operator, whose duties include monitoring the operation of the unit and the timely change of bobbins with film and rubber, ensures the smooth operation of the machine during the shift.

And the demand for a product that protects the floor from particles of dirt or street dust is huge. They are required to wear (purchase) in clinics, hospital departments when visiting patients, in museums, hairdressers and spas, and many other places of public use. Shoe covers cannot be reused, so finding markets is not as difficult as it seems.

Technical characteristics of the machine for the production of shoe covers

Buy equipment for the production of shoe covers with our help - make the most of the case

The price of equipment for the production of shoe covers from China in different companies is different. As well as delivery times. It depends on the capabilities of the company:

independently establish a dialogue with the factory and get a profitable offer without using the services of intermediaries;
quickly take out the units ordered by the client from the manufacturer;
form them into a volume sufficient to load the machine;
customs clearance and documentation;
deliver the purchase to the addressee in Russia.

With our team, which has its own employees at all stages of the logistics processing of goods, both directly in China itself and in Russia, all procedures are carried out quickly and inexpensively. The excellent reputation of the company and the mass of satisfied regular customers distinguish us from many other companies involved in the delivery of goods from China. The equipment for boot covers, as well as other goods imported by us, are of high quality and equipped with everything necessary for the immediate start of operation. Buy equipment for the manufacture of shoe covers at the best price - a great start profitable business! Take advantage of these opportunities today!

Implementation of shoe covers using vending machines

Vending machines for shoe covers, replacing the seller and speeding up the process of selling "disposable shoes", speed up the payback of production. To load them, special capsules are used, in which shoe covers are packed. Machines are divided into two types: mechanical and electronic. Mechanical boot covers are cheaper and easier to maintain, but payment in such machines is made only with coins of a certain denomination. Electronic vending machines for shoe covers allow you to pay with banknotes, they give change, they have a scoreboard. In such machines, you can buy as many capsules with shoe covers at a time as the client needs.

Experienced businessmen, who started their journey with several or one machine, have their own vending machines for boot covers, units for the production of plastic shells. Why don't you go their way?

Equipment for the manufacture of shoe covers does not stamp plastic containers. You need to purchase a capsule machine separately. Consult with our specialist on the solution of STA "SibirTransAsia" and this issue!

The manufacture and sale of shoe covers, contrary to the opinion of skeptics, is a highly profitable business that can bring consistently high incomes to an entrepreneur. And this is explained simply - high demand for products. Please note that today shoe covers are used not only in medical institutions, but also in beauty salons, food enterprises - wherever it is required to maintain sterile conditions. If you buy equipment for the production of shoe covers and start supplying demanded products to the market, profits will not be long in coming. The market for shoe covers is unlimited. The entrepreneur will have the opportunity to sell products both in small wholesale and in large quantities. And the matter is greatly simplified, given that the level of competition in this segment is practically absent. This direction is quite new for us, and therefore, the business plan for the production of shoe covers in Russia has a number of nuances. What is important to consider when working on the implementation of the project?

Our business valuation:

Starting investments - from 2,000,000 rubles.

Market saturation is low.

The complexity of starting a business is 6/10.

Business development prospects

The shoe covers business is extremely simple - the process is automated, the technology is well studied. And this is definitely good. But it is worth looking at the question from the other side - and "where" then to develop? And this factor can clearly “scare away” many start-up entrepreneurs, since there is no question of any expansion of the range of products obtained (here you can only change their color).

There is only one prospect for the development of the shoe covers business - to expand the sales volume of products, entering new markets. But this is also not bad - profits will grow!

Well, for those who are not at all stopped by the lack of the opportunity to innovate in the market, the sale of shoe covers can bring good revenue - regardless of the season and the economic situation in the country. And in a crisis, this is already a lot!

What products to bring to market?

Shoe covers in individual packaging

It is quite clear that we will begin to offer high-quality shoe covers to customers. The difference will be only in the form of the packaging in which it will reach the end consumer. The production of medical disposable shoe covers involves the use of 2 options for "containers":

plastic bag,
plastic capsules.

It is a common practice when entrepreneurs, saving on the purchase of raw materials and equipping the workshop, start producing shoe covers without packaging at all - in this case, the products simply fold one into the other.

It’s great if the company provides for the production of shoe covers in both packaging - this way you can cover a larger circle of potential customers. But if huge starting capital the entrepreneur cannot boast, at first you can do without special machines and apparatus.

Raw materials and technology for the production of shoe covers

Shoe covers in capsules

In order to uninterruptedly supply shoe covers in capsules and in individual packages to the market, it is necessary to conclude agreements with the seller of raw materials for the wholesale supply of all necessary components to the workshop. It is worth to start by monitoring prices in order to choose the most advantageous offer - the range is quite large. All incoming materials for processing must undergo strict incoming control.

The main raw material for the manufacture of shoe covers is a non-woven elastic fabric (polypropylene, polyethylene or spunbond and elastic). But for the production of bags or capsules, it will be required in granules. There is another option - to buy ready-made containers. But in this case, the profitability of manufacturing products is significantly reduced - it is much more profitable to receive packaging within the walls of your own workshop, even taking into account the cost of additional equipment.

The technology for the production of shoe covers of a standard type (slippers-boats with an elastic band on top) can be described as follows:

A roll of raw material is fixed on the machine.
The machine feeds the material. From two sides, a two-row elastic band is supplied for the production of shoe covers, which is then wrapped by a certain method with the edge of the canvas.
The canvas is automatically folded into a half-sleeve with further cutting with a hot knife.
Packaging of finished shoe covers.

All operations are carried out using special equipment - human intervention is minimized. But to launch a workshop, it is better to use the services of an experienced technologist who will select high-quality raw materials and set up equipment for the production of a specific type of product.

Financial aspects of starting your own business

Technical equipment of the workshop

Automatic line for the production of shoe covers

The next thing that an entrepreneur has to take care of is to buy a machine for the production of shoe covers that meets all the requirements for the production of quality products. Despite the low competition in this segment, industrial equipment on the market is presented in a wide choice - different capacities and different prices.

Each production line for the production of shoe covers can work according to one of 2 technologies:

Spike shoe covers with ultrasound. Price - from 1600000 rubles.
Spike shoe covers with heat seal. Price from 1300000 rubles.

The difference in price with the same productivity of the lines is relatively small, and therefore, it is better to take the quality of finished products as the basis for the choice. And shoe covers obtained by exposure to ultrasound are much better - stronger and more reliable.

In order for shoe covers to be packed in special plastic capsules, you will have to purchase additional equipment - devices for receiving containers. In this case, at least another 500,000 rubles must be included in the expense item. The purchase of used machines will help reduce investment.

All equipment presented on the market is small-sized, and therefore, does not require expensive rental of large production areas.

Sales options for finished products

The price of equipment for the manufacture of shoe covers will pay off faster if sales channels for finished products are established as soon as possible. And there are a lot of options to whom to sell the released products:

pharmacies,
municipal institutions (hospitals, ),
recreation centers and sanatoriums,
manufacturing enterprises.

We are not talking about retail sales here - we are only looking for wholesale buyers!

It would be great if an apparatus for the production of shoe covers in plastic capsules is installed in the workshop. It is this type of product that is in high demand today, since many hospitals have special machines for “issuing” shoe covers packed in individual packaging. And even if this direction is not yet considered, after the company reaches the break-even point, it is worth thinking about expanding the workshop by purchasing special equipment for packing shoe covers and manufacturing individual containers.

Profitability of the planned business

The payback period of the enterprise will depend on many factors - how much does a machine for the production of shoe covers cost, how many products will be sold. But if we take into account the opening of a small workshop with a minimum set of equipment, all costs can pay off after 1-2 years.

To estimate the investments necessary to launch the workshop, it is necessary to add up all the capital costs:

Purchase and commissioning of equipment - from 1,600,000 rubles.
Creation of a raw material base - from 500,000 rubles.
Preparation for the work of the premises - from 200,000 rubles.
Registration of the enterprise and obtaining all permits - from 50,000 rubles.

The minimum amount that is required is 2300000 rubles. It is quite possible to reduce the costs to 2,000,000 rubles if a supported line is installed in the workshop.

Calculating possible income is simple. Taking into account how much the film for the production of shoe covers and other raw materials costs, the cost of the finished product is 0.2-0.5 rubles per pair. And its selling price is equal to 0.5-1 rub./pair. And these are the most common products - without individual packaging. The price of a machine for shoe covers will pay off faster if you supply higher quality products (thick, with high-quality elastic) to the market - these cost at least 1.5 rubles / pair.

The main purpose of shoe covers is to maintain the required level of cleanliness in places with increased hygiene requirements - medical institutions, museums, laboratories, manufacturing enterprises etc. Based on the conditions of use, materials and technologies for the production of shoe covers are selected.

Raw materials

Products are made from the following types of materials:

polyethylene . Shoe covers made of polyethylene no less reliably protect shoes from getting wet and dust. The advantages of this product include elasticity and resistance to low-temperature exposure. The production uses low density polyethylene (LDPE, HDPE), medium (MDPE, PSD) high density (HDPE, PVD) density. Compared to spunbond, polyethylene has a lower cost.
spunbond . Spunbond is a technology for the production of non-woven fabric based on polymeric materials (polyester, polyamide, polypropylene). The connection of this material is provided by needle punching or gluing at high temperature exposure. Shoe covers made of spunbond protect well from dust, getting wet, resistant to temperature effects and abrasion. The anti-slip effect ensures the safety of movement on flooring. The advantages of spunbond also include extended service life;

Equipment

The production of shoe covers may include the manufacture of products, their sterilization and packaging. The machines used in the process are as follows:

automatic,
semi-automatic.

The use of automatic equipment eliminates the need for constant human intervention in manufacturing process. All that is required is to set up the machine and maintain the required parameters. The ability to choose the degree of tension of the material and productivity ensures complete automation of the process. Having set up the equipment, the worker needs to monitor the volume of the source material and collect the finished products.

The use of semi-automatic machines requires the participation of personnel and is not able to provide high productivity.

Equipment for the production of shoe covers can use two welding methods - thermal and ultrasonic.

Technological process

The manufacturing process of shoe covers consists of the following steps:

material unwinding. The equipment unwinds the material (polyethylene, spunbond) and a rubber band, which will later be used to fix it on the neck of the product. Particular attention is paid to the uniformity of the web tension;
fixation of the harness on the material. The harness is fixed by ultrasonic or thermal welding. The harness can be flat or round. A round tourniquet is placed on the surface of the material, after which the edges are soldered and the tourniquet is fixed inside. A flat elastic band is stretched and welded to the edge of the material;
folding material. With the help of rollers, the source material is folded in half lengthwise;
open. On the cutting roller with a heated knife cut out ready product and seams are soldered;
sterilization. Produced according to the customer's requirement. Sterilization allows you to neutralize the pathogenic microflora that could appear on the surface of the product during the production process;
packaging of finished shoe covers. Products can go without packaging (wrapped one inside the other), placed in a special capsule or bags. Individual packaging is carried out using special packaging equipment. Packaging in capsules is necessary for subsequent sale through vending machines. Products are packaged in transport packages according to 1, 2, 3 and 4 thousands of couples The cost of shoe covers without packaging is much lower than the other two options.

Quality control

All operations for the production of shoe covers are carried out using modern technological equipment, which allows you to reduce the intervention of workers and the percentage of marriage to a minimum. The choice of raw materials and equipment adjustment is carried out by an experienced technologist. Quality control of products at all stages of production ensures its full compliance with the high requirements of GOST.

Shoe cover production: business features + how to open it + financial plan+ calculation of the payback period.

Capital investments: from 2,580,000 rubles.
Payback period: about 2 years

Few who want to have their own business think about start the production of shoe covers.

In fact, it is quite in demand and profitable business for which there is always a demand.

Shoe covers are disposable products that are worn directly on shoes for hygiene reasons.

The main place of their use are hospitals.

But there are also many other institutions where cleanliness is necessary - cosmetic and massage rooms, SPA centers, food enterprises.

Due to such a narrow focus, many are wondering if it is necessary to get involved in such a specific industry at all.

But it's really cost-effective and profitable business, with the main points and subtleties of which you can find in the article.

Features and prospects for the development of a business for the production of shoe covers

The production of shoe covers, like any other business, has its positive and negative sides.

And already on the basis of their ratio, everyone decides for himself whether he needs to start this kind of entrepreneurial activity.

The main features of the business:

Since shoe covers are disposable products, the sales market in this regard is unlimited.
The main customers will be wholesale buyers, which should be emphasized when looking for distribution channels.

The cost of a pair of products is very low, as well as the cost of implementation.

Therefore, the main focus in marketing should be on increasing sales volumes.

There are no special requirements for the storage of manufactured products, because they are not “afraid” of high humidity and high temperatures.

As for the prospects for development, there is only one option here - an increase in production volumes through the search for new distribution channels, because it will not work to expand the range.

What are shoe covers made from?

Shoe covers are made from non-woven materials, which, despite being used once, must be durable and not tear during the first fitting.

Materials that can be used in production:

Shoe covers are a kind of "socks" that are worn over shoes.

Therefore, in order for them to be tightly fixed around the foot, one more material is needed - a special elastic band.

Most often it is made of latex.

Finding a place for production

You will need a workshop for the production of shoe covers and storage facilities for their storage.

There are no special requirements for them, except for:

the size of the area in the calculation of 25 square meters. m per machine;
availability of communications - electricity, water supply, sewerage, heating;
availability of utility rooms for workers.

As for the place where the production workshop will be located, preference should be given to territories outside the city.

It is also worth paying attention to the office.

At first, it is not necessary to rent a separate room; supply contracts can be concluded by renting meeting rooms.

Also, do not forget about permits from the SES and the fire inspectorate.

Equipment for the production of shoe covers

The most important thing in the production of shoe covers is special equipment.

There are several options for machines, which we will discuss below.

If you choose a full production cycle, that is, the production of shoe covers in a package, then you will need:

machine for the production of shoe covers;
packaging production equipment;
packaging equipment.

In terms of automation, a machine for the production of shoe covers can be:

fully automated - does not require human participation during production.

With the correct setting of the machine, it will itself set the necessary tension of the material and adjust the production speed.

It remains for workers to observe the process and maintain the line;

partially automated - requires the work of personnel.

As a rule, such equipment costs 30% less than fully automated.

A significant disadvantage of a semi-automated machine is low speed and low productivity.

According to the technology of welding seams, a machine for the production of shoe covers can be:

with ultrasonic welding;
with thermocouple.

The performance of both machines is approximately the same, but the cost of the first is about 20% higher.

Both types of equipment can produce 60-100 shoe covers per minute.

Thus, in an eight-hour shift, you can get about 28800-48000 shoe covers.

The next step in the production of shoe covers is the fastening of the fixing elastic band, here the machines can be with:

manual fastening of the elastic band - the elastic band is pulled by hand, after which it is bent and soldered along the edges;
machine fastening of the gum - the gum is fed from both sides, after which it is wrapped and soldered.

For 2-3 production lines, one packing machine will suffice.

Boot covers production technology

Having dealt with the issue of equipment, it is necessary to understand how the production process itself goes.

At the first stage, the web is unwinded and fixed.

Then the machine stretches the material, cuts out the neck and fastens almost finished shoe covers at the seams.

This can be done using ultrasound or heat sealing.

A special elastic band is attached to the neck of the product, which is also soldered.
At the final stage, the shoe covers are packed into separate capsules on the following equipment or manually folded into each other.

There is also such equipment that can fasten the tourniquet immediately to the base material.

After that, the machine cuts out shoe covers according to the pattern and solders all the seams.

Recruitment

If you chose as an individual entrepreneur, then you can independently not only monitor production, but also deal with administrative issues.

But if you want to deploy a full-fledged production, you will need to hire a staff, while you can take on the duties of a director.

Then it will be easier for you to control the process.

As for the duties of the staff, they are distributed as follows:

production workers - monitoring the process, quality control of shoe covers and their further packaging in boxes;
accountant - accounting and tax accounting, reporting;
sales manager - search for distribution channels and conclusion of contracts for the supply of finished goods.

Search for distribution channels for produced shoe covers

From the business there is no point without the inability to sell the finished product.

Since the production of shoe covers has a narrow specialization, then first of all you need to look for such institutions in which they are used.

The sales manager needs to find customers among:

private medical offices;
beauty parlors and beauty salons;
enterprises engaged in food, chemical, cosmetic industries;
rehabilitation centers;
sports facilities;
recreation centers;
pharmacies.

Another marketing option is the vending business.

Conclude lease agreements with the above organizations for the installation of the machine, and thus you will be able to sell shoe covers at retail, not wholesale cost.

But for this, the products must be packed in a special capsule.

As for ways to promote the shoe covers business, here you can resort to:

creating your own website, where to place information about your production;
posting ads online and in print media;
placement of outdoor advertising in the city;
conclusion of direct supply contracts with institutions that need shoe covers.

Financial plan for opening the production of shoe covers

“Business is not about formalities, profit-seeking, bottom line, profit-making, selling, commercial game, or anything else. Business is, first of all, what you care about.”
Richard Branson

After careful planning, it is necessary to start calculating the start-up capital.

The production of shoe covers cannot be attributed to those that require small investments, because in this case it is necessary to purchase expensive equipment.

So, the main items of initial opening costs are as follows:

Item of expenses	Amount, rub.
Total:	RUB 2,580,000
Business registration	10 000
Equipment for the production of shoe covers	1 500 000
Capsule production equipment	500 000
Shoe wrapping equipment	400 000
Hardware setup	10 000
Advertising	50 000
office equipment	100 000
other expenses	10 000
Purchasing a vending machine	35 000

Also, do not forget the regular expenses that are needed to maintain the business:

The video provides an overview of the operation of equipment for the production of shoe covers:

How quickly will the shoe covers business pay off?

As mentioned above, the production of shoe covers is characterized by low cost.

Therefore, the main focus should be on increasing sales volumes.

It is worth trying to ensure that the products do not stay in warehouses, but arrive at the customers as soon as possible.

the approximate cost of one shoe cover is 0.7 rubles.
approximate number of manufactured items per month (30 days) shoe covers 864,000 pieces, i.e. 432,000 pairs
part of the shoe covers will go to wholesale - 850,000 pcs. (425,000 pairs), and part of the machine - 14,000 pieces. (7,000 pairs)
the cost of selling wholesale for a pair is 1.5 rubles, and retail - 5 rubles.
with the full volume of sales, the revenue will be 672,500 rubles.
profit - 113,500 rubles.

Thus, the business will pay off within two years.

This period can be reduced if you purchase more powerful equipment that will produce not 30 pairs of products per minute, but 50.

With competent organization and search for reliable distribution channels production of shoe covers become a profitable and sustainable business.

Remember that disposable products are the main key to success.

The main thing is to produce a quality product that your main customers come to buy on an ongoing basis.

Useful article? Don't miss out on new ones!
Enter your e-mail and receive new articles by mail

In this material:

Shoe covers business is a profitable activity, as finished products does not require strict conditions and terms of storage, it is simply implemented and in demand. Shoe covers have ceased to be an attribute of state clinics and hospitals. Widely used in related fields such as beauty salons, spas, hairdressers, food and other areas where cleanliness and sterility are required.

Shoe cover production line

Shoe covers are a disposable product, the market for which is unlimited. The main customers for sale are wholesale buyers. In order for a business to succeed, it is necessary to develop a strategy correctly, which will allow you to achieve large incomes and a quick payback.

Room for the production of shoe covers

Choosing the right space is one of the most important steps to creating successful business. For manufacturing, an area of at least 45 m2, divided into several zones, will be required. The workshop houses the equipment itself, as well as a warehouse for storing products. For continuous operation, communications will be required: electricity, water, gas, heating. Particular attention must be paid to the air conditioning system. In the manufacturing process of shoe covers, polyethylene is used as the main raw material, which emits an odor when heated. Therefore, to ensure safe work employees need to pay attention to ventilation. Best Option there will be an extract.

In addition to the workshop, there should be a place for office equipment in the room. A place is allocated for a warehouse, accounting, as well as offices for managers and other employees. Thus, the entire area of the premises must be at least 100 m2.

There are two ways to get a room - rent or purchase. On average, rent costs from 30,000 rubles, utilities are paid separately.

Technological process and necessary equipment

A quick and easy way to make shoe covers - production from nonwoven fabric. Spabond, polyethylene or polypropylene is used as a basis.

The production process is as follows:

A roll with raw materials is installed on the equipment.
Under pressure, the raw material is stretched and soldered using heat sealing.
A thin elastic band is welded along the upper edge of the shoe covers, fixing the product on the shoe.
Finished products are packaged in boxes, bags.

For beginner businessmen, a simple production method based on ultrasonic welding is suitable. This will require a structure consisting of an aluminum alloy, an automatic control for tensioning raw materials. The equipment produces about 60 pcs. shots per minute.

When organizing the manufacture of shoe covers based on heat sealing, similar equipment will be required. Production is set up for automatic operation, the serviceability of which is monitored by the working staff and the technologist.

Ultrasonic welding is a cheaper option compared to thermal welding, so for a start-up business, with limited financial resources, it is recommended by analysts to choose it.

Staff

For the smooth operation of production, 6 people will be required, who will perform their functions in shifts. In addition, a technologist is required to control the quality of manufactured products.

Mandatory personnel also include security guards, cleaners, office workers in the form of an accountant, managers, storekeepers, an administrator and a secretary. It is also important to have a management representative who will be responsible for the volumes produced, and establish ways to sell the goods.

It is important to correctly distribute the responsibilities of the staff. Production workers are responsible for the quality of boot covers production and further packaging. Accountant - Responsible for finance and tax accounting. Sales managers deal with sales and contracts. Strict observance of obligations will ensure stable business growth.

Financial plan

A business plan begins with a calculation of expenses and income.

Equipment cost: about 1,400,000 rubles;
delivery and adjustment of equipment: from 10,000 rubles;
purchase of raw materials for manufacturing and gum: 10,000 rubles;
payment of rent, registration in the INFS and other expenses: from 70,000 rubles.

The cost of one pair of shoe covers is approximately 1 ruble. Wholesale companies sell products for almost twice the price of the purchase lot. In 8 hours, the machine produces 28,800 shoe covers. Accordingly, the monthly revenue will be in the region of 864,000 rubles.

You should also consider the list monthly expenses, which includes advertising, purchase of raw materials, wages, taxes, utilities. Costs reach an average of 500 thousand rubles. Thus, with a minimum time frame, the profit will be about 300 thousand rubles. Expansion of the sales market can significantly increase revenues even in the first period of work.

It is very profitable to be engaged in the production of shoe covers. For manufacturing, no license is required, which speeds up paperwork and getting started. For this business area, it is recommended to issue an individual entrepreneur or LLC, depending on the number of owners and the volume of production. Focusing on wholesale trade the company with LLC positions itself as a large, reliable partner. Additionally, for operation, you will need to obtain permission from the Fire Inspectorate and the Sanitary and Epidemiological Station.

Sales of products

For fast and stable sales of products, it is important to organize marketing plan. Advertising uses those resources that will lead to large wholesale buyers. To do this, the development of your own website, printing of advertising brochures, advertising in newspapers and magazines will help. Such measures will allow you to distinguish your own products from competitors. Effectively place advertisements on large banners in cities, as well as conclude agreements for the sale of shoe covers with establishments that need these products.

For sale, you need to look for customers in the following areas:

Private medical offices;
Beauty Salons;
Enterprises of chemical, food, cosmetic specialization;
Rehabilitation and medical centers;
Pharmacies, etc.

Work in one of the proposed areas will ensure the sale of shoe covers not at a wholesale, but at a retail price. However, for the sale, you will need to install special machines for piece issuance.

The production of shoe covers often discourages start-up entrepreneurs due to the erroneous perception of low profitability. With the linear development of its own production, this area brings a stable income. Shoe covers are a disposable, constantly in demand product, the production of which does not require large expenditures.

Order a business plan

	Investments: Investments 450,000 - 1,000,000 ₽ Company Samogonka.NET - network retail stores sales of folk goods: moonshine stills, goods for winemaking, brewing, cooperage products, samovars, related thematic goods. We are a dynamically developing trading and manufacturing company. We have been on the market since 2014. Currently, the company has a group of federal online stores: Samogonka.NET / SeverKedr, including a wholesale and franchising department. In our stores…

	Investments: Investments 370,000 - 1,000,000 ₽ Pyrolysis boilers Tundra - An alternative to gas! You will be a manufacturer and not an intermediary. Our pyrolysis boilers replace gas. This is the most profitable way to heat the room after the main gas. 1st place in terms of cheapness is occupied by main gas (0.5 kopecks per kW) 2nd place pyrolysis boilers (0.8 kopecks per kW) 3rd place is waste oil (1.83 kopecks per kW) 4 ...
	Investments: Investments 1 400 000 - 1 800 000 ₽ The Krown® brand was founded in 1986 in Canada. On the this moment more than 1000 integrated corrosion protection stations are successfully operating in the world. The unique product T40, which was specially developed by the company's engineers, allows you to comprehensively protect vehicles from the harmful effects of the environment. The composition of the inhibitor is protected by a patent, production is organized only at the Krown® company factory in Canada. Every year more than 1,000,000 vehicles…
	Investments: Investments 550,000 - 2,000,000 ₽ Open your chemical production with NPK AtomChem! You will be able to produce products in your region: auto chemical goods and auto cosmetics antifreeze antifreeze liquid and antifreeze household chemicals liquid soap prof. chemistry for enterprises. You can sell it, offer the best price than dealers for similar products. Research and production company "AtomChem" works in the field of chemical production for over 6 years now...
	Investments: Investments 1 500 000 - 4 000 000 ₽ The company "CULT STROY" No. 1 in the design and construction of "Inverted Houses" in Russia, having a slope in two planes of 10 and 13 degrees. At the moment, we have developed and implemented projects in the following cities: Rostov-on-Don, Krasnodar, Stavropol, Yaroslavl, Penza, Gelendzhik, Perm, Ulyanovsk, Voronezh, Blagoveshchensk, Evpatoria. Our long-term plan is that in every city on Earth with a population ...
	Investments: Investments 4 000 000 - 8 000 000 ₽ INGLOT is a wide network of branded salons of European professional decorative cosmetics and cosmetics for skin care. Our brand is independently engaged in the creation of cosmetic products, accessories and equipment, currently uniting more than 700 outlets around the world. The mission of our company is to produce high quality cosmetics at an affordable price for everyone. These are products you can trust...
	Investments: Investments 400,000 - 2,000,000 ₽ NIKI FILINI has been working since 2013, we specialize in selling youth clothing. We are focused on selling sweatshirts, t-shirts, hats, accessories and many other products. 31 franchise partners are already working with us. Franchisee partners grow and help each other. Our goal this year is to open more than 69 franchise stores. We…
	Investments: Investments 1 000 000 - 2 000 000 ₽ In 2016, the company made a full launch of the automated production of the joint venture "First Furniture Factory-ALNO", rebranding the factory, new the lineup for various segments and premium kitchen brand Bruno Piatti. A joint venture with the Piatti Factory has made it possible to produce kitchens according to Swiss quality standards. To date, the First Furniture-ALNO is: -52,000 m2 of production and storage space. - Capacity -50000 sets of furniture...	Investments: Investments 10,000,000 - 15,000,000 ₽ The history of the company began in 1948 and has been going on for 70 years. Currently ROBERTO BRAVO is an international company with offices in Vicenza, Istanbul and Moscow, modern industries in Italy, Turkey and Korea. ROBERTO BRAVO is a regular participant of reputable industry exhibitions that are trendsetters in the world jewelry fashion: VICENZAORO Italy, JEWELRY SHOW Turkey, International Jewelery Show…
	Investments: Investments 1 800 000 - 4 320 000 ₽ The COZY HOME retail chain of stores is a corner of comfort in a modern dynamic city. The range of stores includes exclusive collections of bed linen, fashionable home clothes, original decor, high-quality terry products, pillows, blankets and various cute things for your home. The emphasis is primarily on textiles, because the Company has long been a leading expert in this area and has…
	Investments: Investments 3 000 000 - 6 000 000 ₽ The specialization of the Moscow Jewelry Factory is the production and sale of jewelry made of precious metals and stones. Today, the company is the country's largest manufacturer of diamond jewelry. MUZ is part of an international holding. The holding of companies carries out a full cycle of production and sale of jewelry: Diamond cutting enterprises Own production jewelry (includes two…