Engineer of compressor units of the 6th category. Compressor unit operator. Description of work, tasks and job responsibilities

Unified Tariff and Qualification Handbook of Works and Professions of Workers (ETKS), 2017 Issue No. 1 ETKS Issue approved by the Decree of the USSR State Committee on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions dated January 31, 1985 N 31 / 3-30 (as amended by: Decrees of the USSR State Committee for Labor, Secretariat of the All-Union Central Council of Trade Unions of October 12, 1987 N 618 / 28-99, of December 18, 1989 N 416 / 25-35, of May 15, 1990 N 195 / 7-72, of June 22, 1990 N 248 / 10-28, Decrees of the USSR State Committee for Labor on December 18 .1990 N 451, Decrees of the Ministry of Labor of the Russian Federation of 12/24/1992 N 60, of 02/11/1993 N 23, of 07/19/1993 N 140, of 06/29/1995 N 36, of 06/01/1998 N 20, of 05/17/2001 N 40, Orders of the Ministry of Health and Social Development of the Russian Federation of July 31, 2007 N 497, of October 20, 2008 N 577, of April 17, 2009 N 199) Section ETKS “Professions of workers common to all sectors of the national economy” § 189. Engineer of compressor units (2nd category) Characteristic works.

Error 404 page does not exist

The driver of compressor units of the 5th category must be able to: - maintain stationary compressors and turbochargers with a pressure of up to 1 MPa (up to 10 kgf / cm2) with a flow rate of over 500 to 1000 m3 / min or a pressure of over 1 MPa (over 10 kgf / cm2), with supply over 100 to 260 m3/min each when operating on non-hazardous gases driven by various engines; - service stationary compressors and turbochargers operating on hazardous gases with a pressure of up to 1 MPa (up to 10 kgf/cm), a supply of more than 100 to 250 m3/min or a pressure of more than 1 MPa (above 10 kgf/cmg), with a supply of more than 5 to 100 m'7min each; — serve automated compressor stations with a capacity of up to 100 m3/min; - start up, transfer the unit to the specified mode, put the equipment of the compressor station into reserve and for repair; - regulate technological process production of station products; -.

Job description of the driver of compressor units of the 6th category

Conclusion of technological equipment for repair, participation in the delivery and acceptance of it from repair. 4. Prevention, detection and troubleshooting of process equipment and its systems. 5. Adjustment of compressors, their drives, devices, auxiliary equipment of workshops, compressor stations.
6.

Production of operational switching in electrical installations with a voltage of over 1000 volts in workshops with electric gas-compressor units. 7. Managing the work of machinists with lower qualifications. 8. Responsibilities of an official for this position of a lower (s) category (s).

b) General official duties employee of the organization: - Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

Compressor unit operator

CURRICULUM for advanced training of workers in the profession "Machinist of compressor units" of the 4th category Training period - 2.5 months market economy and entrepreneurship 16 12. General technical course 30 1.2.1. Reading drawings, diagrams 8 1.2.2.

Materials science 8 12.3. Tolerances and technical measurements 8 1.2.4. Electrical engineering 6 1.3. Special course 92 1.3.1. Special technology 92 2. Industrial Training 242 Study time reserve 8 Consultations 4 qualifying exam 8 Total 400 QUALIFICATION CHARACTERISTICS Profession — compressor unit operator Qualification — 5th grade A compressor unit operator of the 5th grade must know and be able to fulfill all the requirements for 4th grade machinists.

Identification and prevention of abnormalities in the operation of the compressor station. 2.22. Maintenance of drive motors. 2.23. Refueling and pumping out oil in consumable and emergency tanks. 2.24. Performing repairs of compressor station equipment within the qualifications of a locksmith of the 5th category.

Attention

Repair of compressors and internal combustion engines in the field. 2.26. Maintenance of reporting and technical documentation on the operation of serviced compressors, machines and mechanisms. 2.27. Drawing up defective statements for the repair of compressor station equipment.

3.

Rights The driver of compressor units of the 6th category has the right to: 3.1. For all social guarantees provided for by law. 3.2. On the additional leave and shortened working hours.

3.3. The right to receive free medical and preventive nutrition in connection with special harmful conditions labor. 3.4.

Job description of the driver of technological compressors of the 6th category

MPa (over 10 kgf/cm2), with a supply of up to 5 M3/MIN each when operating on non-hazardous gases driven by various engines; — service stationary compressors and turbocompressors operating on hazardous gases with a pressure of up to 1 MPa (up to 10 kgf/cm) with a flow rate of more than 5 to 100 m3/min each; – to carry out start-up and regulation of operation modes of compressors and engines; — maintain the required operating parameters of compressors, switch individual units; - to detect and prevent malfunctions in the operation of units, auxiliary equipment and systems of the compressor station; maintain reporting and technical documentation of compressors, machines and mechanisms; -.participate in the repair of units, auxiliary equipment and systems of the compressor station; -.under the leadership of the chief engineer to take part in the prevention emergencies during operation of compressor units.

Working instructions for the driver of compressor units (6th category)

We bring to your attention a typical example of a job description for a driver of technological compressors of the 6th category, a sample of 2017. A person with education, special training and work experience can be appointed to this position. Do not forget that each instruction of the driver of technological compressors of the 6th category is issued on hand against receipt.

The hr-portal website provides typical information about the knowledge that a 6th grade technological compressor driver should have. About duties, rights and responsibilities. This material is included in the huge library of job descriptions on our website, which is updated daily. one. General provisions 1. The driver of technological compressors of the 6th category belongs to the category of workers.
2.

Compressor unit operator: job description

Starting and regulation of operating modes of compressors, turbochargers and engines. Maintaining the required operating parameters of compressors and switching individual units. Identification and prevention of abnormalities in the operation of the compressor station.
Maintenance of reporting and technical documentation on the operation of serviced compressors, machines and mechanisms. Participation in the repair of compressor station units. Must know: the device of reciprocating compressors, turbochargers, internal combustion engines, steam engines and electric motors, their specifications and service rules; piping scheme; installation of simple and medium complexity instrumentation, automatic devices and fittings; reporting and technical documentation of the compressor station; fundamentals of thermodynamics and electrical engineering; properties of gases exhibited during the operation of compressors. § 191.
In his activities, the driver of compressor units of the 6th category is guided by: - ​​regulatory acts on the issues of the work performed; — teaching materials relating to relevant issues; - the charter of the organization; - labor regulations; - orders and orders of the head of the organization, immediate supervisor; - real job description. 1.7. The driver of compressor units of the 6th category must know: - kinematic diagrams and design of turbochargers of various systems and types, power equipment; — electric motors, steam engines, internal combustion engines; - performance characteristics of compressors and power plants for them; - fire safety rules; - internal labor regulations; - safety rules; - the provisions of this job description. 2. FUNCTIONAL RESPONSIBILITIES 2.1.

Important

N 297; The list of industries, professions and positions, work in which gives the right to receive free therapeutic and preventive nutrition in connection with especially harmful working conditions, rations for therapeutic and preventive nutrition, norms for the free distribution of vitamin preparations and rules for the free distribution of therapeutic and preventive nutrition, approved. Decree of the Ministry of Labor of the Russian Federation of March 31, 2003 N 14 and other regulatory legal acts regulating labor relations. 1. General provisions 1.1. The driver of compressor units of the 6th category belongs to the category of workers and is directly subordinate.

(name of position of immediate supervisor) 1.2. A person with special training is accepted for the position of a compressor unit operator of the 6th category, without presenting requirements for work experience. 1.3.

We bring to your attention a typical example of a job description for a driver of technological compressors of the 6th category, a sample of 2019. A person with education, special training and work experience can be appointed to this position. Do not forget that each instruction of the driver of technological compressors of the 6th category is issued on hand against receipt.

It presents typical information about the knowledge that a 6th grade process compressor driver should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. The driver of technological compressors of the 6th category belongs to the category of workers.

2. The driver of technological compressors of the 6th category is accepted by a person who has ________ secondary specialized education (education, special training) and work experience in this position ________ years.

When servicing the electrical equipment of a workshop with electric gas-pumping units, it must have an IV electrical safety group.

3. The driver of technological compressors of the 6th category is hired and dismissed by __________ (by whom, position)

4. The driver of technological compressors of the 6th category must know:

a) special (professional) knowledge of the position:

— gas transportation technology;

- layout of pipelines of the workshop and inter-shop communications;

- basic information on automated process control systems;

— specifications and technology for all types of Maintenance and repair of compressors, their drives, valves and equipment;

— gas lift technology and cycling process;

- qualification requirements for this position of a lower rank.

b) general knowledge of the employee of the organization:

— rules on labor protection, industrial sanitation and fire safety;

- rules for the use of funds personal protection;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- range and marking of materials used, consumption rates of fuels and lubricants;

- rules for the movement and warehousing of goods;

- types of marriage and ways to prevent and eliminate it;

5. In his activities, the driver of technological compressors of the 6th category is guided by:

— legislation Russian Federation,

- Charter (regulations) of the organization,

- this job description,

- The internal labor regulations of the organization.

6. Engineer of technological compressors of the 6th category reports directly to: ______________ (position)

2. Job responsibilities of the driver of technological compressors of the 6th category

Engineer of technological compressors of the 6th category:

a) Special (professional) duties:

1. Maintenance of compressor stations, control panels of the workshop level, as well as general workshop systems for cleaning and drying gas, oil supply, heat recovery at the compressor station.

2. Production of operational switching on the technological piping of compressor stations, regulation of the workshop operation mode at the direction of the dispatching service.

3. Bringing technological equipment into repair, participating in the delivery and acceptance of it from repair.

4. Prevention, detection and troubleshooting of process equipment and its systems.

5. Adjustment of compressors, their drives, devices, auxiliary equipment of workshops, compressor stations.

6. Production of operational switching in electrical installations with a voltage of over 1000 volts in workshops with electric gas-compressor units.

7. Managing the work of machinists with lower qualifications.

8. Responsibilities of an official for this position of a lower (s) category (s).

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

— Execution within employment contract orders of employees to which it is repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition.

- Maintaining established technical documentation.

3. Rights of the driver of technological compressors of the 6th category

The driver of technological compressors of the 6th category has the right to:

1. Submit proposals for management consideration:

– to improve the work related to the provisions of this responsibilities,

- on the promotion of distinguished employees subordinate to him,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the management concerning its activities.

5. Require management to provide assistance, including the provision of organizational and technical conditions and the execution of established documents necessary for the performance of official duties.

6. Other rights established by the current labor law.

4. Responsibility of the driver of technological compressors of the 6th category

The driver of technological compressors of the 6th category is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current legislation of the Russian Federation.

Job description of the driver of technological compressors of the 6th category - a sample of 2019. Job duties of the driver of technological compressors of the 6th category, rights of the driver of technological compressors of the 6th category, responsibility of the driver of technological compressors of the 6th category.

Compiled in ___ copies. I approve _____________________________ (initials, surname) _________________________________ _____________________________ (name of employer, (manager or other person, _________________________________ _____________________________ his organizational and legal authority to approve _________________________________ _____________________________ form, address, telephone number, address job description) _________________________________ Email, OGRN, TIN / KPP) "___" ____ y. "___" ____________ ____ y. N _____ M.P.

JOB INSTRUCTIONS for the driver of compressor units of the 6th category (sample form)

1. GENERAL PROVISIONS

1.1. This job description defines functional responsibilities, rights and responsibility of the driver of compressor units of the 6th category.

1.2. The driver of compressor units of the 6th category belongs to the category of workers.

1.3. A person with a secondary education and appropriate training in the specialty is appointed to the position of a compressor unit operator of the 6th category.

1.4. The driver of compressor units of the 6th category is appointed and dismissed by the head of the organization on the proposal of __________________.

1.5. The driver of compressor units of the 6th category reports directly to __________________.

1.6. In his activities, the driver of compressor units of the 6th category is guided by:

Normative acts on the issues of the work performed;

Methodological materials relating to relevant issues;

the charter of the organization;

Labor regulations;

Orders and orders of the head of the organization, immediate supervisor;

This job description.

1.7. The driver of compressor units of the 6th category must know:

Kinematic diagrams and design of turbochargers of various systems and types, power equipment;

Electric motors, steam engines, internal combustion engines;

Operational characteristics of compressors and power plants for them;

Fire safety rules;

Internal labor regulations;

Safety rules;

provisions of this job description.

2. FUNCTIONAL RESPONSIBILITIES

2.1. The driver of compressor units of the 6th category carries out:

2.1.1. Maintenance of stationary compressors and turbochargers with pressure up to 1 MPa (up to 10 kgf / sq. cm), with a supply of more than 1000 cubic meters. m/min. or pressure over 1 MPa (over 10 kgf / sq. cm), with a supply of over 250 cubic meters. m/min. each when operating on non-hazardous gases driven by different engines.

2.1.2. Servicing of stationary compressors and turbochargers operating on hazardous gases with a pressure of up to 1 MPa (up to 10 kgf / sq. cm), with a supply of more than 250 cubic meters. m/min. or pressure over 1 MPa (over 10 kgf / sq. cm), with a supply of over 100 cubic meters. m/min. every.

2.1.3. Maintenance of automated compressor stations with a supply of more than 100 cubic meters. m/min.

2.1.4. Monitoring the operation of all equipment of the compressor station.

2.1.5. Regulation of the technological process for the production of station products.

2.1.6. Drawing up defective statements for the repair of compressor station equipment.

2.1.7. Production of repair of compressor station equipment within the qualification of a locksmith of the 5th category.

2.1.8. ___________________________.

3. RIGHTS

3.1. The driver of compressor units of the 6th category has the right to:

3.1.1. Require the management of the organization to assist in the performance of their duties.

3.1.2. Get acquainted with the draft decisions of the organization's management regarding its activities.

3.1.3. Improve your skills.

3.1.4. Submit proposals on the issues of their activities for consideration by their immediate supervisor.

3.1.5. Receive from employees of the organization the information necessary for the implementation of their activities.

3.1.6. ___________________________.

4. RESPONSIBILITY

4.1. The driver of compressor units of the 6th category is responsible for:

4.1.1. For failure to perform or improper performance of their duties stipulated by this job description - in accordance with the current labor legislation of the Russian Federation.

4.1.2. For offenses committed during the period of its activities - in accordance with the current civil, administrative and criminal legislation of the Russian Federation.

4.1.3. For causing material damage - in accordance with the current legislation of the Russian Federation.

4.1.4. For violation of the internal labor regulations, fire safety and safety regulations established in the organization.

4.1.5. ___________________________.

5. MODE OF OPERATION

5.1. The mode of operation of the driver of compressor units of the 6th category is determined in accordance with the internal labor regulations established in the organization.

5.2. In accordance with _______________, the employer evaluates the performance of the driver of compressor units of the 6th category. The set of measures for evaluating the effectiveness was approved by _________________ and includes:

- ___________________________

- ___________________________

- ___________________________

The job description was developed on the basis of ______________________________ ________________________________________________________________________________. (name, number and date of the document) Head of the structural unit ___________________________ _____________________ (initials, surname) (signature) "___" ___________ ____ d. familiarized with the instruction: (or: received the instruction) _____________________ _____________________ (initials, surname) (signature) "___" ___________ ____

• preparation of technical documentation for the operation of the serviced equipment;
• taking part in the repair of units and parts of the station.

Knowledge for the third level An employee with the third level must know:

• installation of turbocompressors, reciprocating compressors, internal combustion engines, electric motors, steam engines and installations;
• technical characteristics of the described units and rules for their maintenance;
• arrangement of control and measuring equipment, maintenance rules and technical specifications;
• installation piping scheme;
• documentation necessary for the operation of the installation;
• fundamentals of thermodynamics, as well as electrical engineering;
• properties of gases in compressor operation.

Fourth rank A driver with the specified rank serves turbochargers and stationary compressors up to 10 kgf/cm2 (1 MPa).

Error 404 page does not exist

The employee must know:

• principles of operation of a turbocharger;
• principle of operation of a piston compressor;
• operation of steam engines and turbocompressors;
• the principle of operation of electric motors;
• ways to troubleshoot engines and compressors;
• methods of using instruments for measurement and control, as well as the purpose of each instrument;
• station piping scheme;
• operating pressure and air temperature corresponding to each mode;
• permissible temperature to which the operating unit of the unit can be heated;
• ways to eliminate overheating, as well as measures to prevent overheating;
• grades of oils used in the installation for lubricating units.

The third category Compressor unit operator is trained not only in vocational schools or universities.

Job description of the driver of compressor units of the 6th category

• repair of internal combustion engines and compressor units in field and emergency conditions.

Knowledge for the fifth grade A fifth grade mechanic must know the internals fairly well. Required knowledge:

• kinematic diagrams of turbocompressors, electric motors, steam engines, internal combustion engines;
• high pressure compressors;
• operating rules and characteristics of auxiliary equipment, steam engines, electric engines, turbocompressor installations;
• technological processes of the station;
• Efficiency of the compressor and applied designs and systems.

The sixth category The work of the driver of the sixth category requires the greatest concentration, and knowledge must be supported not only by theory, but also by practice.

Compressor unit operator

The driver of compressor units of the 2nd category must be able to: 1. maintain stationary compressors and turbochargers with a pressure of up to 1 MPa (up to 10 kgf/cm2) with a flow rate of up to 5 m3/min each when operating on non-hazardous gases driven by various engines; 2. start, regulate and stop compressors; 3. observe the operation of compressors and auxiliary equipment; 4. lubricate and cool the rubbing parts of compressor mechanisms; 5. General qualification requirements are given for all grades 6.
prevent and eliminate malfunctions in the operation of compressors and monitor the operation of its safety devices; 7. service drive motors; 8. refuel and pump out oils into consumable and emergency tanks; 9. participate in the repair of compressor station equipment; 10.

The driver of compressor units of the 6th category must know: - kinematic diagrams and design of turbochargers of various systems and types, power equipment; — electric motors, steam engines, internal combustion engines; - performance characteristics of compressors and power plants for them; - fire safety rules; - internal labor regulations; - safety rules; - the provisions of this job description. 2. FUNCTIONAL RESPONSIBILITIES 2.1. The driver of compressor units of the 6th category performs: 2.1.1.

Maintenance of stationary compressors and turbochargers with pressure up to 1 MPa (up to 10 kgf / sq. cm), with a supply of more than 1000 cubic meters. m/min. or pressure over 1 MPa (over 10 kgf / sq. cm), with a supply of over 250 cubic meters. m/min. each when operating on non-hazardous gases driven by different engines. 2.1.2.

Job description of the driver of technological compressors of the 6th category

MPa (over 10 kgf / sq. cm), with a supply of up to 5 cubic meters. m/min. every. 2.8. Maintenance of stationary compressors and turbochargers operating on hazardous gases with pressures up to 1 MPa (up to 10 kgf/sq.
cm), with a supply of more than 100 to 250 cubic meters. m/min or pressure over 1

MPa (over 10 kgf / sq. cm), with a supply of over 5 to 100 cubic meters. m/min. every. 2.9. Maintenance of stationary compressors and turbochargers operating on hazardous gases with pressures up to 1 MPa (up to 10 kgf/sq.

cm), with a supply of more than 250 cu. m/min. or pressure over 1

Attention

MPa (over 10 kgf / sq. cm), with a supply of over 100 cubic meters. m/min. every. 2.10. Maintenance of automated compressor stations with a capacity of up to 100 cubic meters.

m/min. 2.11.

Maintenance of automated compressor stations with a supply of more than 100 cubic meters. m/min. 2.12. Starting, regulating and stopping compressors, turbochargers and engines.

Working instructions for the driver of compressor units (6th category)

Compiled in copy. I approve (initials, surname) (name of the employer, (head or other person, his organizational and legal authority to approve the form, address, phone number, job description) e-mail, OGRN, TIN / KPP) » » » » » .N M.P. JOB INSTRUCTIONS for the driver of compressor units of the 6th category ( approximate form) 1.

Important

GENERAL PROVISIONS 1.1. This job description defines the functional duties, rights and responsibilities of the driver of compressor units of the 6th category. 1.2. The driver of compressor units of the 6th category belongs to the category of workers.

1.3. A person with a secondary education and appropriate training in the specialty is appointed to the position of a compressor unit operator of the 6th category. 1.4.

Compressor unit operator: job description

Maintenance of stationary compressors and turbochargers with pressure up to 1 MPa (up to 10 kgf / sq. cm), with a supply of up to 5 cubic meters. m/min. each when operating on non-hazardous gases driven by different engines. Starting, regulating and stopping compressors. Monitoring the operation of compressors and auxiliary equipment.

Lubrication and cooling of rubbing parts of compressor mechanisms. Prevention and elimination of malfunctions in the operation of compressors and control of the operation of its safety devices.

Maintenance of drive motors. Refueling and pumping out oil in consumable and emergency tanks. Participation in the repair of compressor station equipment.

For failure to perform or improper performance of their duties stipulated by this job description - in accordance with the current labor legislation of the Russian Federation. 4.1.2. For offenses committed during the period of its activities - in accordance with the current civil, administrative and criminal legislation of the Russian Federation.

For causing material damage - in accordance with the current legislation of the Russian Federation. 4.1.4. For violation of the internal labor regulations, fire safety and safety regulations established in the organization.

4.1.5. . 5. MODE OF OPERATION 5.1. The mode of operation of the driver of compressor units of the 6th category is determined in accordance with the internal labor regulations established in the organization. This job description has been developed in accordance with.

CURRICULUM for advanced training of workers in the profession "Machinist of compressor units" of the 3rd category Training period - 2.5 months . Reading drawings, diagrams 8 1.2.2. Materials science 8 1.2.3. Tolerances and technical measurements 8 12.4. Electrical engineering 6 1.3. Special course 92 1.3.1. Special technology 92 2. INDUSTRIAL TRAINING 242 Training time reserve 8 Consultations 4 Qualification exam 8 Total 400 QUALIFICATION CHARACTERISTICS Profession - compressor unit operator Qualification - 4th category A compressor unit operator of the 4th category must know and be able to fulfill all the requirements for machinists 3 discharge.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Machinist of compressor units of the 6th category" belongs to the category "Workers".

1.2. Qualifications- vocational education. Advanced training and work experience by profession as a compressor unit operator of the 5th category - at least 1 year.

1.3. Knows and applies:
- kinematic diagrams and designs of turbochargers of various systems and types of power equipment;
- electric motors, steam engines, internal combustion engines;
- operational characteristics of compressors and power plants to them.

1.4. The driver of compressor units of the 6th category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).

1.5. The driver of compressor units of the 6th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The engineer of compressor units of the 6th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The driver of compressor units of the 6th category during his absence is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Serves stationary compressors and turbochargers with a pressure of up to 1 MPa (10 kgf/cm2), with a supply of more than 1000 m3/min., or a pressure of more than 1 MPa (10 kgf/cm2), with a supply of more than 250 m3/min each during operation at safe gases driven by various engines.

2.2. Serves stationary compressors and turbochargers that operate on hazardous gases with a pressure of up to 1 MPa (10 kgf/cm2), with a supply of more than 250 m3/min., or a pressure of more than 1 MPa (10 kgf/cm2), with a supply of more than 100 m3/min every.

2.3. Serves automated compressor stations with a flow rate of over 100 m3/min.

2.4. Supervises the operation of all equipment of the compressor station.

2.5. Regulates the technological process of production of station products.

2.6. Draws up defective lists for the repair of compressor station equipment.

2.7. Carries out repairs of compressor station equipment within the qualification of a locksmith of the 5th category.

2.8. Knows, understands and applies the current regulatory documents relating to its activities.

2.9. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The engineer of compressor units of the 6th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. The driver of compressor units of the 6th category has the right to receive all social guarantees provided for by law.

3.3. The driver of compressor units of the 6th category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. The driver of compressor units of the 6th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The driver of compressor units of the 6th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The driver of compressor units of the 6th category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. The driver of compressor units of the 6th category has the right to improve his professional qualifications.

3.8. The driver of compressor units of the 6th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The driver of compressor units of the 6th category has the right to get acquainted with the documents defining the rights and obligations for the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The driver of compressor units of the 6th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The driver of compressor units of the 6th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The driver of compressor units of the 6th category is responsible for disclosing information about the organization (enterprise / institution) that is a trade secret.

4.4. The driver of compressor units of the 6th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The driver of compressor units of the 6th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The driver of compressor units of the 6th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The driver of compressor units of the 6th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

5. Specialization

5.1. An assistant to the driver of a compressor or turbocompressor station is charged two ranks below the rank of the driver under whose supervision he works, but not lower than 2 digits.