All electricians who maintain and repair electrical equipment work under the guidance of power engineers. Only people of the age of majority, who have passed a medical examination, listened to instructions and had internship experience in working conditions, are allowed to repair and maintain electrical equipment. Also, after training, it is required to pass an exam on the knowledge of labor safety according to intersectoral rules when working with electrical installations, after which a corresponding certificate of 5th category, 4th category or lower is issued, which must be confirmed every 5 years. On average, training takes 1 year and 5 months, this also includes an electrician ops. All electricians who repair or service electrical equipment in electrical units before and after 1000 V observe:

• Working instructions;
• Actual intersectoral rules on labor protection while working with electrical installations;
• Rules for the arrangement of electrical installations;
• Rules for the technical use of electrical installations of consumers.

General job description

The electrician is related to the working category.
An electrician can be a person who has a special secondary education in the required specialty and with work experience. An electrician is appointed and removed from his post only by order of the management.

An electrician must have knowledge of:

• Decrees, orders, instructions that refer to such regulations that regulate the activities of an electrician;
• Basic knowledge of electronics, telemechanics, electrical engineering, radio engineering, to know the devices of various microcircuits that have electrical devices, machines, measuring instruments and their characteristics, the principle of operation, checking for accuracy;
• Telecontrol and automatic adjustment schemes and recovery and debugging options.
  Rules for handling logic circuits with complexities;
• Methods of general testing of electrical apparatus, units and devices;
  Technologies while working with epoxy materials;
• Rules for the restoration and installation of a cable network in places with a high probability of fire, explosion and in other difficult conditions;
• Rules for the assembly of electrical circuits and other documents of electrical equipment in electrical networks.
  Standards for loads on transformers, cables, electric motors, wires of different power and voltage;
• Wiring diagrams of primary and secondary switching devices of distribution.
  The principles of protection devices that have a high-frequency blocker;
• A variety of types of problems that electrical appliances may have, as well as know the options for subsequent troubleshooting;
• Organization and technology of electrical work;
• Norms of consumption of material, spare parts and electrical energy;
• Fundamentals of economics, the organizational process of production, management and labor;
• Fundamentals of labor legislation;
• Internal labor regulations;
• Factory sanitary requirements, labor protection requirements, fire protection and safety requirements.

The main task of the electrician is to ensure the operability and trouble-free operation of all equipment. This also includes its correctness during use, timely repairs, as well as:

• Adjustment, adjustment and full control of electronic and self-recording devices;
• Debugging and maintenance of an ignitron type welding device with electronics, an electric pulse installation, complex distance protection, devices for automatic activation of a reserve, complex circuits where semiconductor installations with transistor and logic elements are used;
• Collection, disassembly, complete repair, installation, alignment of high-voltage electrical machines and electrical apparatus of different voltage systems over 15 kW;
• Work with complex epoxy terminations in high-voltage cable networks, installation of couplings, for connecting aluminum and copper cables;
• General testing of electric motors, devices and transformers of various capacities, which have just completed a major overhaul;
• Check the accuracy class of measuring transformers;
• Works with installation, dismantling and maintenance of cable lines in pipelines intended for this, which are filled with oil or are under gas pressure;
• Preparatory phase for all electrical equipment after repair for commissioning.

Responsibilities of an electrician

Also, an electrician has his own specific duties of an electrician, he is required Xia:

• Participate in the correction of various malfunctions in the operation of devices, adjustment, regulation, measurement and testing;
• To study and use innovative ways of maintenance, restoration, installation and other activities with devices;
• Take part in activities that increase the reliability and quality of all technical devices, as well as in the improvement of all working ones;
• Perform all work related to the repair, assembly and adjustment of complex, important and new electrical machines, electrical devices and assemblies;
• Take part in sending applications for ordering spare parts, consumables, tools and spend everything rationally;
• Comprehensive testing of electric motors, devices and transformers of different capacities upon their exit from overhaul;
• Prepare electrical elements made after restoration for work;
• Learn the characteristics of the device, find out the causes of early failure and eliminate them;
• Fulfill the requirements of the manager, which are not in the job description, but which arise due to production needs;
• Install meters and work with insulation in the cable line, up to 35 kW;
• Pass technical retraining once every 5 years, as many new nuances appear in five years.

What rights does an electrician have?

The electrician has such rights as:

• Making proposals to the management of the economy to improve the economic maintenance of facilities;
• Enhance your qualifications;
• Make inquiries according to your needs, as well as at the request of the head of the department and the specialist about the data and documentation that are required in order to perform job duties;
• Make demands on the management of the company in order to provide the organizational specifications that are required in order to fulfill the duties of the job.

What is the responsible electrician for?

The electrician has certain responsibilities, and in particular for:

• Conscientious fulfillment or non-fulfillment of obligations that are in the instructions;
• Violations made at work, which correspond to the valid administrative and criminal civil codes;
• Causing any damage, which is indicated by valid civil and labor legislation;
• Failure to comply with the requirements for the execution or dishonest execution of work requirements, orders, assignments, orders of superiors that were not indicated in official duties, but arose due to labor necessity and for other violations that are included in the job description. Non-compliance will be followed by a reprimand, remark or dismissal.

Interaction

The electrician always:

• Performs his work according to the schedule, which is compiled for a 40-hour working week and was approved by the director of the organization;
• Takes information of a regulatory nature from the head economic department organizations, studies the required documentation with a signature;
• Contacts with issues that are within his competence, together with colleagues in the department.

Conclusion

The electrician has his own clearly defined instructions, during the implementation of which all norms must be observed. Compliance with all the requirements that are part of the duties of an e-manter can guarantee a successful promotion, as well as the absence of subsequent complaints and problems.

Video about the profession of an electrician

APPROVE

Executive Vice President Dmitry Kuzmin

Russian Union of Industrialists and Entrepreneurs (OOR)

A. S. Pushkin

JOB DESCRIPTION

electrician of the 4th category

Subdivisions « Technical technologies»

1. General Provisions

1.1. This job description defines the functional, job duties, rights and responsibilities of an electrician of the 4th category of the Technical Technologies subdivision (hereinafter referred to as the Electrician of the 4th category) of the Russian Union of Industrialists and Entrepreneurs (OOR) (hereinafter referred to as the Institution).

1.2. A person who meets the following requirements for education and training is appointed to the position of an electrician of the 4th category:

Professional education- vocational training programs for the professions of workers, retraining programs for workers, advanced training programs for workers;

with practical experience:

4th category - at least one year in the profession of an electrician for maintenance of substations of the 3rd category for the performance of work on maintenance of equipment of substations with a voltage of 35-750 kV;

3rd category - without presenting requirements for work experience;

Special conditions for admission to work as an electrician of the 4th category:

Electrical safety qualification group not lower than III;

Admission to independent work is made after passing the introductory, primary, repeated briefing at the workplace, internship, duplication, testing of knowledge in the commission and passing the fire-technical minimum;

Passage of mandatory preliminary (when applying for a job) and periodic medical examinations (examinations), as well as extraordinary medical examinations (examinations) in the manner established by law Russian Federation;

1.3. An electrician of the 4th category must know:

Safety rules when working with tools and devices;

Rules for the technical operation of power plants and networks in terms of substation equipment;

Necessary knowledge provided by the labor function B/01.3;

Device, purpose of various types of equipment (suspended, tension insulation, busbars, lightning protection, grounding circuits) their areas of application;

Officials and manufacturing instructions personnel servicing substation equipment;

Validity periods, physical volumes of new construction and reconstruction of electrical networks and transmission lines of the division;

Appointment of the main locksmith and fitter's tool;

Testing standards for power transformers;

Requirements for the operation of power transformers;

Labor protection requirements during the operation of electrical installations in terms of the functional duties of a team member;

Operating equipment, its factory characteristics and requirements of manufacturing organizations for its operation;

Scheme of electrical networks located in the area of ​​operational responsibility;

Standards for testing and measuring equipment;

Types of communication installed at substations, rules for their use;

Purpose and scope of relay protection and automation;

Purpose of telemechanics devices;

Rules for admission to work in electrical installations;

Instructions for first aid in case of accidents at work;

Principles of conducting thermal imaging control;

Thermal mode of operation of substation equipment;

Fire safety rules;

Methods for determining the parameters of the technical condition of equipment and its assessment;

Fundamentals of electrical engineering;

Principles of operation of surge protection devices for substation equipment and requirements for their operation;

Terms of testing protective equipment and devices used at substations with a voltage of 35-750 kV;

Schemes of primary connections, auxiliary networks, operating current and electromagnetic blocking;

Requirements for labor protection, industrial and fire safety, industrial sanitation and fire protection, regulating the activities of the labor function;

1.4. Electrician of the 4th category must be able to:

Cut, splice, insulate and solder wires;

Necessary skills provided by the labor function B/01.3;

Maintain technical documentation;

Work with basic locksmith and fitter's tools;

Work in a team (team);

Work with special diagnostic devices and equipment as part of the work function performed;

Assess the condition of the equipment and determine the measures necessary for its further operation;

Master new technologies (as they are introduced);

Apply reference materials on maintenance and repair of substation equipment;

Provide first aid to victims at work;

Define specifications substation equipment based on equipment certificates, operating circulars, factory documentation, design and executive documentation;

Use fire extinguishing agents;

1.5. An electrician of the 4th category is appointed to the position and dismissed from the position by the order of the Executive Vice President Kuzmin Dmitry Vladimirovich of the Institution in accordance with the current legislation of the Russian Federation.

1.6. An electrician of the 4th category reports to the executive vice-president Dmitry Kuzmin of the Institution and the head of the Technical Technologies department

2. Labor functions

2.1. Maintenance of the fixed equipment of substations with a voltage of 35-750 kV under the supervision of highly qualified personnel.

2.2. Production of auxiliary and preparatory work on the fixed equipment of substations with a voltage of 35-750 kV under the guidance of highly qualified personnel.

3. Job responsibilities

3.1. Checking the condition of the battery during inspections according to the factory instructions.

3.2. Changing bulbs and fuses.

3.3. Verification of the results of the monthly performance of the scope of work by the operating personnel.

3.4. Registration of acts for Maintenance power equipment of substations and distribution points.

3.5. Formation of a list of defects in power equipment of substations and distribution points, batteries of substations.

3.6. Carrying out small-scale and short-term work to eliminate faults on boards and assemblies of auxiliary needs, in drives of switching devices, in secondary switching circuits of closed and open switchgears of substations.

3.7. Troubleshooting the lighting network and fittings.

3.8. Implementation of the functions of the manufacturer of works on maintenance of substation equipment.

3.9. Determination of battery parameters.

3.10. Ensuring the set mode for voltage, load, temperature.

3.11. Monitoring the state of power equipment of substations and distribution points, batteries of substations according to approved schedules, work plans and upon arrival at the facility.

3.12. Inspection of substation equipment for malfunctions and taking measures to eliminate the identified deficiencies.

3.13. The implementation of the admission of repair personnel to work on the order, order to the workplace.

3.14. Obtaining permission from higher operational personnel to carry out work on assigned equipment in accordance with the requirements of the order, order.

3.15. Maintenance of devices and tools at their workplace in accordance with the requirements of labor protection and in a condition that ensures their safe operation.

3.16. Acceptance of jobs upon completion of work with registration in the order and magazine.

4. Rights

Electrician of the 4th category has the right:

4.1. Request and receive the necessary information, as well as materials and documents related to the activities of an electrician of the 4th category.

4.2. Improve qualifications, undergo retraining (retraining).

4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of an electrician of the 4th category.

4.4. Participate in the discussion of issues that are part of his functional duties.

4.5. Make suggestions and comments on the improvement of activities in the assigned area of ​​work.

4.6. Apply to the relevant local authorities or to the court to resolve disputes arising in the performance of functional duties.

4.7. Use information materials and legal documents necessary for the performance of their duties.

4.8. Pass certification in the prescribed manner.

5. Responsibility

The electrician of the 4th category is responsible for:

5.1. Failure to perform (improper performance) of their functional duties.

5.2. Failure to comply with the orders and instructions of the Executive Vice President Kuzmin Dmitry Vladimirovich of the Institution.

5.3. Inaccurate information about the status of the execution of assigned tasks and instructions, violation of the deadlines for their execution.

5.4. Violation of the internal labor regulations, fire safety and safety regulations established in the Establishment.

5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.

5.6. Disclosure of information that became known in connection with the performance of official duties.

For the above violations, an electrician of the 4th category can be brought in accordance with the current legislation, depending on the severity of the misconduct, to disciplinary, material, administrative, civil and criminal liability.

This job description has been developed in accordance with the provisions (requirements) Labor Code of the Russian Federation dated December 30, 2001 No. 197 FZ (Labor Code of the Russian Federation) (as amended and supplemented), the professional standard "Employee for maintenance of equipment of substations of electrical networks" approved by order of the Ministry of Labor and social protection of the Russian Federation dated December 29, 2015 No. 1177n and other regulatory legal acts regulating labor relations.

APPROVE:

________________________

[Job title]

________________________

[Name of company]

________________/[F. AND ABOUT.]/

"____" ____________ 20__

JOB DESCRIPTION

Electrician for the repair and maintenance of electrical equipment of the 4th category

1. General Provisions

1.1. This job description defines functional responsibilities, rights and responsibility of an electrician for the repair and maintenance of electrical equipment of the 4th category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. An electrician for the repair and maintenance of electrical equipment of the 4th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. An electrician for the repair and maintenance of electrical equipment of the 4th category belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. A person with a secondary vocational education and special training without presenting requirements for work experience is appointed to the position of an electrician for the repair and maintenance of electrical equipment of the 4th category.

1.5. IN practical activities an electrician for the repair and maintenance of electrical equipment of the 4th category should be guided by:

local acts and organizational and administrative documents of the Company; internal labor regulations; rules of labor protection and safety, ensuring industrial sanitation and fire protection; instructions, orders, decisions and instructions of the immediate supervisor; this job description.

1.6. An electrician for the repair and maintenance of electrical equipment of the 4th category must know:

fundamentals of electronics; installation of various types of DC and AC electric motors, protective and measuring instruments, switching equipment; the most rational ways of checking, repairing, assembling, installing and maintaining electric motors and electrical equipment, ways to protect them from surges; purpose of relay protection; operating principle and overcurrent protection schemes; selection of wire cross-sections, fusible links and protection devices depending on the current load; device and principle of operation of semiconductor and other rectifiers; technical requirements to the execution of electrical wiring of all types; nomenclature, properties and interchangeability of electrical insulating and conductive materials used in the repair; methods of carrying out adjustment and commissioning works and delivery of electrical equipment with ballasts after repair; basic electrical norms for setting up serviced equipment, methods for checking and measuring them; the principle of operation of equipment, power supplies; device, purpose and conditions for the use of a complex control and measuring tool; design of universal and special devices; safety regulations in the scope of qualification group IV.

1.7. During the period of temporary absence of an electrician for the repair and maintenance of electrical equipment of the 4th category, his duties are assigned to [name of the position of the deputy].

2. Functional responsibilities

An electrician for the repair and maintenance of electrical equipment of the 4th category performs the following labor functions:

2.1. Dismantling, overhaul of electrical equipment for any purpose, of all types and dimensions under the guidance of a highly qualified electrician.

2.2. Regulation and verification of equipment and devices of electric drives after repair.

2.3. Repair of amplifiers, light and sound alarm devices, controllers, control posts, magnetic stations.

2.4. Maintenance of power and lighting electrical installations with complex switching circuits.

2.5. Performance of work at departmental power plants, transformer electrical substations with their complete disconnection from voltage.

2.6. Implementation of operational switching in electrical networks with the revision of transformers, switches, disconnectors and drives to them with disassembly of structural elements.

2.7. Checking, installation and repair of fluorescent lighting circuits.

2.8. Unwinding, cutting, dosing, cable laying, installation of input devices and couplings, terminations in cable lines with voltage up to 35 kV.

2.9. Determination of cable damage points, measurement of ground resistance, potentials on the cable sheath.

2.10. Identification and elimination of failures and malfunctions of electrical equipment with switching circuits of medium complexity.

2.11. Soldering with soft and hard solders.

2.12. Performance of works according to drawings and schemes.

2.13. Selection of starting resistances for electric motors.

In case of official necessity, an electrician for the repair and maintenance of electrical equipment of the 4th category may be involved in the performance of his duties overtime, in the manner prescribed by law.

An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to:

3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.2. Submit proposals for the management to improve the work related to the responsibilities provided for in this job description.

3.3. Notify the immediate supervisor of any deficiencies identified in the course of the performance of their duties in production activities enterprise (its structural subdivisions) and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (separate) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the provisions on structural divisions if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. An electrician for the repair and maintenance of electrical equipment of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Republic of Kazakhstan, and criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of an electrician for the repair and maintenance of electrical equipment of the 4th category is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of an electrician in the repair and maintenance of electrical equipment of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of an electrician for the repair and maintenance of electrical equipment of the 4th category is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, an electrician for the repair and maintenance of electrical equipment of the 4th category is obliged to travel to business trips(including local values).

Acquainted with the instruction ___________ / ____________ / "____" _______ 20__

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Electrician for the repair and maintenance of electrical equipment of the 4th category" belongs to the category "Workers".

1.2. Qualifications- vocational education. Advanced training and work experience in the profession of an electrician for the repair and maintenance of electrical equipment of the 3rd category - at least 1 year.

1.3. Knows and applies:
- basics of electrical engineering;
- the structure of various types of DC and AC electric motors, protective and measuring instruments, switching equipment;
- the most rational ways to check, repair, assemble, install and maintain electric motors and electrical equipment, ways to protect them from overvoltage;
- appointment of relay protection;
- the principle of operation and schemes of maximum current protection;
- selection of the wire section, fusible links and protection devices depending on the current load;
- structure and principle of operation of semiconductor and other rectifiers;
- technical requirements for the implementation of electrical wiring of all types;
- nomenclature, properties and interchangeability of electrical insulating and leading materials used during repairs;
- methods of carrying out adjustment and commissioning works and delivery of electrical equipment with ballasts after repair;
- basic electrical norms for setting up serviced equipment, methods for checking and measuring them;
- the principle of operation of equipment, power supplies;
- device, purpose and conditions for the use of a complex control and measuring tool;
- design of universal and special devices;
- labor protection rules in the scope of qualification group III.

1.4. An electrician for the repair and maintenance of electrical equipment of the 4th category is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. An electrician for the repair and maintenance of electrical equipment of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. An electrician for the repair and maintenance of electrical equipment of the 4th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. An electrician for the repair and maintenance of electrical equipment of the 4th category during his absence is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Disassembles, carries out major repairs of electrical equipment for any purpose, of all types and dimensions under the guidance of an electrician of a higher qualification.

2.2. Adjusts and checks the equipment and devices of electric drives after repair.

2.3. Repairs amplifiers, light and sound alarm devices, controllers, control posts, magnetic stations.

2.4. Serves power and lighting electrical installations with complex switching circuits.

2.5. Performs work at departmental power plants, transformer electrical substations with their complete shutdown from voltage.

2.6. Performs operational switching in the electrical network with the revision of transformers, switches, disconnectors and drives to them with disassembly of structural elements.

2.7. Performs inspection, installation and repair of fluorescent lighting circuits.

2.8. Unwinds, develops, doses, lays the cable, mounts input devices and couplings, performs final filling in cable lines with voltage up to 35 kV.

2.9. Determines the location of cable damage, measures ground resistance, potentials on the cable sheath.

2.10. Detects and eliminates failures and malfunctions of electrical equipment with switching schemes of medium complexity.

2.11. Carries out soldering with soft and hard solders.

2.12. Works according to drawings and diagrams.

2.13. Selects starting resistance for electric motors.

2.14. Knows, understands and applies the current regulatory documents relating to its activities.

2.15. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The electrician for the repair and maintenance of electrical equipment of the 4th category has the right to take actions to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to receive all social guarantees provided for by law.

3.3. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to get acquainted with the draft documents relating to his activities.

3.6. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to improve his professional qualifications.

3.8. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An electrician for the repair and maintenance of electrical equipment of the 4th category has the right to familiarize himself with documents defining the rights and obligations of his position, criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for disclosing information about an organization (enterprise / institution) that is a trade secret.

4.4. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for causing material damage to an organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. An electrician for the repair and maintenance of electrical equipment of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Interlocks electromagnetic and electromechanical - repair and adjustment.

5.2. Oil switches - repair with the manufacture and replacement of contacts, regulation for the simultaneous inclusion of three phases and checking the plane of the contacts.

5.3. Asynchronous electric motors with a power of more than 500 kW and squirrel-cage motors with a power of more than 1000 kW - disassembly, assembly with damage repair.

5.4. Explosion-proof electric motors with a power of more than 50 kW - disassembly, repair, assembly.

5.5. Crane feeding electric columns - disassembly, repair, assembly and adjustment.

5.6. Electrostatic precipitators - check, repair and installation.

5.7. Darkeners - repairs with the manufacture of limit switches, replacement of brushes and microswitches.

5.8. Command devices, actuators, temperature sensors - testing, repair and adjustment.

5.9. Control equipment for lifting tables of rolling mills - inspection and repair.

5.10. Gantry cranes, container loaders - maintenance, adjustment and testing of electrical equipment.

5.11. Secondary switching circuits - checking indicators.

5.12. High voltage power lines - energized test.

5.13. Pneumatic loaders - maintenance, current repair of drives and ballasts, testing and adjustment.

5.14. Plain bearings of electric motors of all capacities - scraping.

5.15. Potentiometers electronic automatic temperature control of drying and calcining furnaces - repair and adjustment.

5.16. Time relay - checking and troubleshooting in the electromagnetic wire.

5.17. Selenium rectifiers - repair with the replacement of washers, the manufacture of jumpers with regulation and adjustment.

5.18. Switchboards high-voltage - installation with the installation of fittings.

Examples of job descriptions for an electrician:

1. Job description of an electrician for the repair and maintenance of electrical equipment of the 4th category of the energy supply service

1. GENERAL PROVISIONS

1.1. The main task of an electrician for the repair and maintenance of electrical equipment of the 4th category is the repair and maintenance of electrical equipment, electrical machines, electrical starting equipment, electrical networks with a voltage of 0.4 kV, electrical lighting equipment.

1.2. Electrical repair and maintenance electrician equipment 4p. is appointed and dismissed from the position of the enterprise after agreement with the deputy for the technical part and the lead power engineer.

1.3. For the post of email electrician for repair and maintenance equipment 4p. a person is appointed who has reached the age of 18, has a special education, has passed a medical examination, training, a test of knowledge of the Rules in the scope of the requirements determined by the profession and has received a certificate.

1.4. Email electrician for repair and maintenance equipment 4p. Reports directly to the Lead Power Engineer.

1.5. Email electrician for repair and maintenance equipment according to the job description must know:

Fundamentals of electrical engineering;

Connection diagrams for active and reactive energy meters through current and voltage transformers;

Scheme of power supply and location of electrical equipment in the sanatorium;

The principle of operation and the device of ballasts for fluorescent lamps, as well as DRL lamps;

Methods for finding fault points in cable networks with voltage up to 1000 V and eliminating them with the installation of couplings;

Ways to protect electrical equipment from overvoltage;

Rules for measuring portable devices;

Electrical diagrams of electrical equipment of hoisting machines;

The principle of operation and design of AC machines;

Electrical diagrams for connecting electrical machines, insulation standards and insulation tests, overload protection, grounding;

Rules for the production of work performed without removing the voltage away from live parts under voltage;

The device, purpose and conditions for the use of a complex control and measuring tool;

Techniques for finding and troubleshooting in electrical networks with voltage up to 1000 V;

Methods of work and sequence of operations for disassembly, assembly, repair and adjustment of electrical machines;

Purpose and arrangement of tools, fixtures, mechanisms and equipment in the course of work;

Economy mode and rational use electricity;

Safety and personal safety rules when performing work;

Functional responsibilities;

The structure and organization of the work of the department and the sanatorium;

Decrees, orders, orders of higher authorities, methodological, regulatory and other guidance materials relating to its work;

Dates, time and place of business qualification classes, OOI, civil defense, sanitary days, sanitary hours, trade union meetings and other public events;

Law of Ukraine "On labor protection";

Law of Ukraine "On fire safety";

Regulatory documents and acts on labor protection;

Rules and norms of labor protection;

Fire safety and industrial sanitation rules;

Electrical safety rules;

Internal labor regulations;

Instructions on labor protection and fire safety;

Law of Ukraine on Civil Defense;

Regulations on the Civil Defense of Ukraine;

Collective agreement;

Basics labor law;

Job instruction.

2. FUNCTIONS OF THE WORKER

2.1. The area of ​​work of an electrician for the repair and maintenance of electrical equipment of the 4th category is the repair and maintenance of electrical equipment, electrical machines, electrical starting equipment, electrical networks with a voltage of 0.4 kV, electrical lighting equipment.

The workplace is: a hydropathic clinic, a mud bath, a heat point, a lake-mud farm, a pump room mineral water, buildings of the sanatorium, park facilities.

2.2. Electrician for the repair and maintenance of electrical equipment 4 rubles:

2.2.1. Prepares his workplace.

2.2.2. Conducts inspections of the technical condition of serviced equipment, electrical networks.

2.2.3. Carries out constant supervision of the working electrical equipment.

2.2.4. Maintain electrical equipment in good condition.

2.2.5. Conducts technical testing of electrical equipment and networks, current and overhauls electrical equipment and power networks with a voltage of 0.4 kV.

2.2.6. Takes measures to immediately eliminate the causes and conditions that may cause downtime, accident or other damage.

2.2.7. Complies with and fulfills the requirements of rules, norms and other regulatory documents on labor protection, fire, electrical and technological safety, industrial sanitation and labor legislation.

2.2.8. Complies with and fulfills the requirements of the governing and regulatory documents on civil defense and in case of emergencies.

2.2.9. Working on improving his skills.

2.2.10. Observes the rules of internal labor regulations, labor and production discipline.

2.2.11. Participates in the conduct of sanitary hours, days.

2.2.12. Ensures the complete safety of the property entrusted to him.

2.2.13. Fulfills the requirements of the collective agreement.

3. SERVICE RESPONSIBILITIES Electrician for the repair and maintenance of electrical equipment 4r.

Responsible for the job description:

3.1. Qualitatively and in a timely manner to perform the functions assigned to him in accordance with the requirements of the current legislation, regulations, regulations, instructions and orders of the administration.

3.2. Perform daily tasks received from the lead energy engineer and tasks according to the approved work plan.

3.3. Put on overalls (cotton suit), check the availability and serviceability of the grounding of the equipment being serviced, the serviceability and timing of testing of electrical protective equipment and personal protective equipment.

3.4. Conduct inspections of electrical equipment, electrical networks, electric lighting equipment, electric starting equipment daily in order to identify emerging defects and determine the required amount of preparatory work to be performed during scheduled repairs.

3.5. Observe the operating conditions and mode of operation of the equipment in accordance with the manufacturer's instructions; loading equipment in accordance with passport data, preventing accidents of overload, every shift lubrication, cleaning and cleaning of equipment in operation; strict observance of the procedure for starting and stopping power units, established by the manufacturer's instructions; immediate shutdown of the equipment in the event of abnormalities in operation that can lead to emergency equipment failure, taking measures to identify and eliminate these abnormalities; transfer of equipment from shift to shift, which consists in inspecting and checking the condition of mechanisms and equipment.

3.6. Timely tighten fasteners, eliminate defects in drives and guards, replace failed component equipment, installation products, coils of ballasts without disassembling the unit or its separate unit.

3.7. To carry out technical tests of electrical equipment and networks to identify hidden defects and abnormalities in the operation of equipment, to carry out adjustment work in a timely manner in order to restore and improve operational characteristics.

3.8. Inspect and check the fastenings of electromagnets, limit switches, control buttons, local lighting fittings, etc.; repair of constipation and blocking the opening of the doors of niches with electrical equipment; cleaning tires, wiring, terminal blocks and contact connections, apparatus cases from dust and dirt; repair and replacement of the electric motor; check the insulation of electric motors, the condition of terminals and contact connections, clean the housings of electric motors from dust and dirt, the condition and replacement of lubricants, replacement of bearings; repair of electrical equipment, checking the insulation of electrical wiring (for overheating, charring and mechanical damage), electrical wiring fasteners, serviceability of the grounding network; insulation resistance measurement; if necessary, replacement of individual sections of electrical wiring; repair and replacement of damaged pipes, metal and rubber hoses; testing and adjustment of the electrical circuit.

3.9. Carry out a complete rewiring of all electrical wiring and replacement of failed electrical equipment, current repairs of other electrical devices; testing and adjustment of the entire electrical circuit.

3.10. Take measures to immediately eliminate the causes and conditions that may cause downtime, an accident or other damage, and if it is not possible to eliminate these causes on your own, immediately notify the lead power engineer or other official about this.

3.13. Pass introductory, primary at the workplace, repeated, unscheduled and targeted briefings, training on labor protection and safety, testing knowledge on labor protection.

3.14. Comply with the rules and regulations of health protection, fire safety and industrial sanitation.

3.15. Stop the operation of machines, mechanisms and other equipment if there is a threat to life and health, and immediately inform the lead power engineer about this.

3.16. To carry out safe storage, transportation and use of radioactive, poisonous, explosive, flammable and other substances and materials.

3.17. Comply with the requirements of normative acts on labor protection, instructions, rules for handling equipment and other means of production, use means of collective and individual protection.

3.18. Comply with labor protection obligations collective agreement and internal labor regulations.

3.19. Comply with labor protection rules when working in accordance with instructions N _______.

3.20. To pass in due time preliminary and periodic medical examinations(at least once a year).

3.21. Cooperate with the administration in organizing safe and healthy working conditions, personally take all feasible measures to eliminate any production situation that poses a threat to his life and health or the people around him and the natural environment.

Reports the hazard to the lead power engineer or other official.

3.22. Immediately inform the lead power engineer about the accidents at work and ensure the provision of timely medical assistance to the victims.

3.23. Provide first aid to the injured.

3.24. Inform the leading power engineer or the chief of staff of civil defense and emergency situations about the prerequisites for an emergency at the facilities.

3.25. To fulfill their duties as part of the emergency formation of the GO of the sanatorium.

3.26. Know the warning signals of civil defense and the procedure for acting on them.

3.27. To take part in the promotion of civil defense issues among the workers of the sanatorium.

3.28. Work on improving their skills by attending business qualification classes held in the sanatorium, self-studying special literature.

3.29. Comply with the requirements of general moral and ethical standards and deontology.

3.30. Comply with labor regulations and labor discipline.

3.31. To be at the workplace in a sober condition and in a satisfactory state of health that does not interfere with the performance of their functional duties.

3.32. Give a written explanation about the violation of labor or production discipline (absenteeism, appearing at work in a state of intoxication or other misconduct).

3.33. Actively participate in community life.

3.34. To take part in the holding of sanitary days (hours), subbotniks for the improvement of the territory of the sanatorium.

On a sanitary day (hour) he cleans, whitewashes, paints in his office (at his workplace), in common areas and in the assigned territory of the sanatorium, and also digs and weeds flower beds, mows grass, cleans weeds, dry foliage and herbage , caring for plants, etc.

3.35. Ensure the complete safety of the property entrusted to him.

Carefully treat the property of the sanatorium and take urgent measures to prevent damage.

3.36. Fulfill the requirements of the collective agreement.

Job description electrician signed by the employee.
The job description of an electrician of the 4th category must be approved and agreed upon.

2. Job description for a KP electrician

1. Is the contractor for the technical operation and current repair of power lines, electrical equipment (power plants, starting measuring devices, grounding and zeroing, group distribution and safety shields, adapter boxes, installation equipment) and is directly subordinate to the foreman, technician or foreman.

2. In his activities, he is guided by this instruction, the rules for the operation of the housing stock, specifications for the production and acceptance of special works, the current "Rules for the technical operation of electrical installations" (PTE) and "Safety regulations for the operation of electrical installations" (PTB), approved by the Ministry of Energy and Electrification of Ukraine, as well as orders and orders of higher and immediate supervisors transmitted through the foreman , technician or master.

3. The electrician performs the following duties:

In accordance with the schedule, conducts regular technical inspections of power lines and electrical equipment - twice a year;

Performs installation and replacement of switches, sockets, fuses, plug and ceiling sockets in workshops, service and office premises and common areas;

Carries out minor repairs of starting equipment and partial replacement of new group distribution and safety shields and boxes, as well as electrical installations (checking and repairing traverses, insulation, windings with painting and drying, etc.);

Arranges electrical wiring for lighting basements, attics and common areas (stairwells, entrances, etc.), and also replaces burnt out light bulbs and individual electrical wiring points in these premises;

Installs automatic switches in common areas and current limiters in communal apartments;

Installs and connects house lights, entrance signs, etc. to the power grid;

Provides normal lighting of stairwells, entrances, garbage bins, house lamps;

Connects to house electrical panels welders, winches and other mechanisms;

Performs other minor repairs and maintenance of electrical networks and electrical equipment of the objects it serves;

In case of detection of defects that threaten the safety of people, the integrity of equipment and fire safety or threatening accidents in the facilities of the energy supply organization, immediately turn off the emergency section and inform the energy supply organization.

Agreed: chairman of the trade union committee, Lawyer

Familiarized with the job description of the electrician.

3. Job description of an electrician for the repair and maintenance of electrical equipment in LLC

1. General Provisions.

1.1. Appointed to the position by the order of the director of TORGOVAYA BAZA LLC on the proposal of the person responsible for the electrical economy, if there are documents confirming the training in educational institution and medical opinion. It is allowed to work after a preliminary examination of knowledge on labor protection (OT) in the amount necessary for this position. He is dismissed from his position in accordance with the established procedure, including in the event of a repeated unsatisfactory result of testing knowledge on OT.

1.2. Subordinates directly to energy. Carries out its work in accordance with the schedule of PPO and PPR of electrical equipment, production plans and instructions from the management.

1.3. The permanent workplace is the electrical workshop, as well as the facilities of the enterprise, where he is sent to perform his duties.

1.4. Guided by the relevant laws, standards, rules, instructions and other regulations of Ukraine, industry, documents of the enterprise administration.

2. Responsibilities

The electrician for the repair and maintenance of electrical equipment must:

2.1. To ensure the safe, reliable and economical operation of electrical equipment in accordance with established requirements for its trouble-free operation.

2.2. Know the design, principle of operation, circuit diagrams electrical equipment used at serviced facilities.

2.3. Strictly observe the schedule of PPO and PPR of electrical equipment, follow the requirements of maintenance instructions.

2.4. Monitor the correct operation of metering devices and the correctness of their readings.

2.5. If malfunctions of electrical equipment are detected, take measures to eliminate them, and if it is impossible to eliminate them on your own, report to the management.

2.6. Maintain cleanliness and order in the workplace, carefully use tools and clothing.

2.7. Take care of personal safety and health, as well as the safety and health of others in the process of performing any work or while being on the territory of the enterprise.

2.8. Know and comply with the requirements of regulatory legal acts on labor protection, rules for handling machines, mechanisms, equipment and other means of production, use of collective and personal protective equipment.

2.9. To undergo preliminary and periodic medical examinations in accordance with the procedure established by law.

2.10. To carry out internal acts on OT of the enterprise.

3. Rights.

An electrician for the repair and maintenance of electrical equipment has the right to:

3.1. To visit all the objects of OOO TORGOVAYA BAZA.

3.2. Suspend the operation of electrical equipment in emergency condition.

3.3. Make suggestions for technical improvement production processes and equipment.

3.4. Require relevant officials to provide materials, equipment, instruments, safety equipment and personal protection.

4. Qualification requirements.

electrician for repair and maintenance of electrical equipment

4.1. Must have a special education, confirmed by a diploma or certificate.

4.2. Must be trained and certified in accordance with the procedure established by the State Supervision of Labor of Ukraine, have an appropriate certificate.

4.3. Must have an electrical safety approval group of at least III /

4.4. Must know the basics of labor legislation, standards, GOSTs, guidelines, instructions, regulations, orders and other guidance materials related to its activities, production technology, device and operating modes of serviced equipment, regulatory documents of Ukraine, the Autonomous Republic of Crimea, industry and enterprises on labor protection and fire safety concerning the performance of work.

5. Relationships.

Interacts with officials Torgovaya Baza LLC in accordance with the current standards, regulations, instructions and orders for the enterprise.

6. Responsibility.

Bears disciplinary, material, administrative and criminal liability for violation of the requirements of this manual and current legislation in the manner prescribed by law.

Compiled by: Responsible for electrical facilities

Job description of an electrician - 4.4 out of 5 based on 11 votes