Coloring red rabbit fur at home. Dyeing products made of natural and artificial fur. How to dye white rabbit fur

For those who are interested in how to dye fur at home, we will share our secrets. There is no need to rush to throw away a fur thing if it is a little burnt out, or you are just tired of its color. Following our instructions and following the advice, you will give things a second life, you will be happy to wear it ... until the next painting.

Important information before dyeing fur

• Astrakhan fur can only be dyed black or brown.
• Mink fur of gray, blue, brown color is dyed in the same colors to obtain a more intense shade.
• In brown, you can qualitatively dye the fur of pastel, beige, pearl tones.
• Mouton items are dyed brown or black.

Very often, hair dyes are used to dye fur at home. This is not a difficult procedure, but requires attention and accuracy. Here's how to do it.

We paint fur with hair dye

• Apply a layer of any oily cream, or a solution of glycerin, to the mezdra of the fur - this will protect it from drying out.
• Moisten the fur carefully. This will allow the paint to spread more evenly.
• The paint is applied to the entire fur surface, not forgetting the core.
• For a more even distribution of the coloring composition, the fur needs to be wrinkled by hand.
• The exposure time of the paint is from 35 to 45 minutes.
• Rinse off paint under running water.
• If you place the dyed item in a saline solution for 5-10 minutes, you can get a more durable and shiny color.
• Spread the fur on a flat surface, remove excess moisture with your hands, and leave to dry.
• Comb the dried fur in the direction of the villi.
• Hair dye will keep well on the fur for up to six months, then it will begin to “peel off”.

• The fur chosen for dyeing should not be very old,
• Remember, it is good to dye the fur at home when it is clean. If there is dust, dirt, grease on the hairs of the fur, this will not allow the paint to penetrate into the hair, and the product will be dyed unevenly, with spots. Alkaline solution copes well with fur cleaning. Its composition: take salt and baking soda per liter of water - one dessert spoon each, a teaspoon of ammonia, a little dishwashing detergent.
• If a product made of white fox has turned yellow, then it can be lightened. We prepare the solution: pour a teaspoon of hydrogen peroxide into a glass of warm water and drip 7-10 drops of ammonia. Treat the ends of the fur with the finished mixture. Wipe the treated fur with a cotton swab moistened with water. Try not to wet the leather base - the core. Before processing the entire product completely, conduct an experiment on a small inconspicuous area.
• For painting, you should choose a dye whose shade is darker by one or two tones than the color of the product. So you can hide small "skin" defects. The fur of a red or steppe fox can be easily updated with a thick solution of potassium permanganate - potassium permanganate, diluted to a dark brown color. Coloring should be done with a foam sponge, avoiding wetting of the core.
• You can “refresh” the burnt ends of the fur using suede paint, which is available in the form of an aerosol. Uniform coloring can be achieved by spraying the paint slowly, from a distance of at least 70 centimeters from the product. Having processed one area, it should be combed, smoothing the fur.
• Using a tinting shampoo, you can update the color of the fur, making it richer.

Summary

Even knowing well how to dye fur at home, you probably shouldn’t dye large fur products on your own. For this, there are special establishments where qualified craftsmen will qualitatively fulfill your order. Good luck.

Natural and artificial fur are very beautiful materials intended for tailoring exclusive clothes. Unfortunately, despite the high cost, they are prone to fading from ultraviolet radiation. Spoil their precipitation, others adverse factors, as a result, the brightness of the products decreases.

To prevent a fur coat or hat from looking shabby, you need to learn how to dye fur at home, and use one of the methods.

Artificial material is much cheaper, less susceptible to adverse external influences, although it can also deteriorate and take on a worn look. You can also paint it, but not every tool is suitable. With the wrong selection of paint, hairs will come out, the material will shed heavily without the possibility of recovery.

Where to start painting

Before starting work, you need to carefully inspect the product. If it has traces of moth activity, other mechanical damage, “bald patches”, staining will not save the situation. It is better to take the thing to the studio, where they can give it a second life. The fur needs to be combed, cleaned of debris, dust, all impurities, so that the paint is light as evenly as possible. Next, you should choose the appropriate option for working with fur products.

How to dye fur: artificial and natural

Experts advise using for this purpose professional compositions designed specifically for dyeing fur skins. Such products are especially recommended if the hairs are thick and long. You can use hair dye, but you have to buy several packs, which can be quite expensive. There is an option to cover fur products with aerosol, which is sold in hardware and shoe stores. Such a tool can only refresh the ends of the fur. It is not possible to paint over the entire thickness of the material with an aerosol. For full coloring, you will have to buy a special tool or hair dye.

Before work, it is necessary to carry out a test for the degree of aggressive effect of the paint:

• dilute a small amount of the product (if it is powder);
• lubricate the material in an inconspicuous area;
• withstand the time specified by the instruction;
• wash off the paint;
• assess the condition of the material;
• start full dyeing, if the fur has retained its quality, has not changed its structure within 2 days.

When you want to make fur 1-3 tones lighter, you can use not paint, but clarifier. The most commonly used means are "Supra", "Blond" based on ammonia. It is better to paint artificial products only with specialized compounds with a note about this possibility. Hair dye will immediately ruin this material, so it's not worth the risk.

Coloring with paint for curls

In its structure, fur resembles human hair, so its color can be completely changed by a means familiar to every woman - hair dye. Similar products are sold in any supermarket, household chemicals store, and the choice in terms of prices and shades is very diverse. When buying, consider the following mandatory requirements to paint:

• durability (usually acquire means that can paint over gray hair);
• the tone is at least one shade darker than the color of the hairs;
• gentle composition, no caustic substances.

If you want to lighten dark material, you first have to discolor it with the appropriate paint. Next, re-staining in the desired shade. It happens that white fur turns yellow from long wear. It will also have to be discolored before staining, otherwise the yellowness will distort the selected shade. For fox fur, you need to purchase more paint than for mink, rabbit. For a long fur coat, up to 5-6 packs of paint may be required.

Spray for dyeing fur

If the tips of thick fur are burnt out in the sun, it is not necessary to carry out its full coloring. Sometimes it is enough just to paint the discolored part, and the thing will shine like new. To update the fur, you need to purchase a spray for suede in a bottle, but you should not save on its quality. A low-quality product can stain hands, things, and human skin for a long time.

Using spray paint is very easy. You need to hang a fur product on a hanger on a balcony, terrace, or cover all surrounding surfaces with cellophane. Then spray paint from a distance of 40-50 cm, working through each area. After finishing work, you need to comb the fur, let it dry well. For drying it is permissible to use a hair dryer. Usually the result is enough for one season, then the thing will need to be painted again.

Selection of shades for different colors of fur

Coloring without preliminary discoloration should always be carried out in a tone darker than the original one. For example, to update the classic brown mink fur, you need to buy a dark brown dye. If the fur is new, has not been worn, has not burned out at all, it will be difficult to paint over it, since the pigments do not fit well on such material. You will have to add not only more funds, but also take a darker shade. This is easy to do: you need to pour a little black into the brown paint.

Gray and blue mink are usually dyed the same color, choosing the appropriate tone for the hair. The material will not change the shade, but it will become brighter, more saturated. Long-haired fur should also be dyed in a tone close to natural, because for high-quality dyeing of hairs, you will have to make a lot of effort and buy several packages of the product.

What is needed for work

Before starting the process, you need to prepare water, hair dye or a specialized product, a bleach preparation (if necessary). Also, to wash the fur you will need soda, ammonia, salt, soft detergent.

Stages of dyeing fur

To get a good, lasting result, you need to consistently follow all the steps and do the work carefully.

Preparing the item for painting

During wear, the thing became very dirty, began to shine, particles of fat settled on it. It is impossible to wash fur products with the usual method: they will immediately deteriorate in the typewriter. Therefore, for cleaning and subsequent uniform laying of the paint, it is necessary to carry out a special treatment with an alkaline solution.

Fur cleaning

To clean the material, you need to prepare a solution from:

• 2 liters of water;
• 2 tablespoons of soda;
• 2 tablespoons of salt;
• a tablespoon of dish detergent;
• 3 drops of ammonia.

All components must be diluted with water, shake the solution well. Hang the product on a hanger. Lubricate the skin (skin) with glycerin, after opening the lining. You can skip this step if you manage not to wet the skin. Otherwise, it may crack or shrink after drying.

Comb the fur, use a clean sponge to process the prepared product. Thick wool should be moistened with a brush, evenly distributing the liquid over the surface and carefully grabbing the undercoat. After 10 minutes, wash off the solution with clean water, being careful not to wet the skin. Then dry the product well in the open air, in a ventilated area. You can’t hang it near the battery, you can’t stove!

In addition to this recipe, there are a number of products that are suitable for cleaning fur:

• equal parts of 4% vinegar, water, alcohol;
• animal shampoo solution;
• professional cleansing spray (Furasol or other).

  Color fixing

  To fix the color, a solution is prepared: 5 tablespoons of table vinegar (9%) are diluted in two liters of water. After the product is sprayed with a fur product. If the dyeing was carried out with hair dye, you can apply the attached balm to the fur. This will make the product incredibly soft, silky. The balm is applied as on the hair, washed off after 5 minutes, and only then the pigment is fixed with vinegar.

  Drying

  When all work is completed, the fur must be dried. To do this, the thing is placed on strong wide coat hangers, which should fit well in size. It is advisable not to take metal coat hangers (wooden ones are ideal). The product must be brought into a warm room, but placed away from heating appliances, and allowed to dry. Before complete drying, you can apply a little glycerin to the fur and comb it, setting the desired direction to the pile. Usually drying takes 2-5 days depending on the type of fur and the size of the product.

  Fur care after dyeing

  Over time, the hairs of old fur can become stiff, fade even after dyeing. To fix the problem, you can periodically rinse the product with hair balm. It is better to take the tool that comes with the paint (you can buy inexpensive paint and pull out the balm). Sprinkling things with a solution of vinegar 9% (a spoonful in a glass of water) will also add shine. The effect of painting in any case will be temporary. Once a season it is worth tinting a thing so that it does not lose its gloss and always looks attractive!

Fur coats, vests, hats natural fur rabbit, arctic fox, silver fox or mink - these are expensive things that we wear for several years. But over time, the fur product begins to lose its original attractiveness: some places are rubbed off, the color fades ... And then we ask ourselves, is it possible to dye the fur at home? Indeed, how else to extend the life of your favorite fur coat? Let's say right away: it is possible, but such a procedure will take a lot of time. Painting a fur product requires special care, and the process itself takes place in several stages.

Preparing the item for painting

Before dyeing the fur at home, it must be cleaned of particles of dirt and grease. If this is not done, the paint may not absorb well and stains and stains will remain on the fur. An alkaline solution is prepared for cleaning. For 1 liter of water you will need:

• 1 teaspoon of dishwashing detergent or washing powder;
• 5 g ammonia;
• 15 g of salt;
• 10 g of soda.

The resulting liquid must be evenly applied to the entire area of ​​​​the fur with a brush, and then thoroughly rinsed under running water. If you do not have ammonia or soda at home, you can prepare a solution of alcohol, vinegar and water. All ingredients must be taken in equal parts. Such folk remedies cleaning will be effective for different types fur - arctic fox, silver fox, rabbit and mink. Lubricate the skin on the reverse side fat cream for hands to prevent drying out.

Coloring

Natural fur is very similar in structure to human hair, which is why it is most effective and convenient to use hair dye from any supermarket or household chemicals store. For a long lasting result, use a good permanent paint. Pay attention to the structure of the fur. Arctic fox and mink fur have a dense pile, unlike rabbit and silver fox, so two packs may be required at once.

Before painting a fur product, you need to try the paint on a small piece of the product. This will help make sure that the dye lays down evenly and the desired shade is obtained. Apply the paint with a brush and then spread the mixture with your hands. It is necessary to withstand the dye for as long as indicated in the instructions for use. Then the thing is thoroughly washed in warm water and left to dry. The use of fans and hair dryers is not recommended.

It is better to paint in shades darker than the base color. If you do the opposite, you can get an unexpected color, for example, mink fur can turn a little yellow when dyed blond. The most pliable in this case is the fur of a white rabbit. It does not need to be bleached and it is easy to give it any color (pink, red, black, ashen). But you need to remember that rabbit fur is a very delicate material and you need to carry out any manipulations with it with special delicacy. If you still doubt that you can dye the fur yourself at home, it is better to contact a specialized workshop.

After you have managed to recolor the fur product, you need to take care of saving the result. So that the paint is well fixed, before drying, the product is placed for some time in warm water with vinegar. Nourishing hair balms will help to give the fur of a rabbit, mink or arctic fox shine and silkiness. Apply the product diluted with water to the dried item with a brush, hold for a few minutes and rinse well.

Fur dyeing is not such a laborious process as it might seem at first glance. The main thing is to correctly choose the color and follow the sequence of actions. Buy expensive durable paint. Then the "new thing" will delight you for more than one year.

It happens that with the onset of cold weather, you take your favorite white down jacket out of the closet and see that it is no longer worth wearing it ... The down jacket itself is intact - intact, but white fox collar has acquired an unpleasant yellow tint. With a sigh, you take off your collar and decide that over time you will have to buy a new thing, but for now you will wear it without a great addition in the past - fox trim. But do not rush to throw the collar in the trash or cut into fur patches. The situation can be easily corrected.

At home, the fur collar can be dyed with regular hair dye. And this procedure does not require much effort from you.
In this article, we provide step by step instructions fur dyeing.

1. In order for the dye to freely penetrate the structure of the fur, it is necessary before dyeing degrease and clean from dirt.
To do this, you need to prepare a special solution. We take:
- table salt - 3 teaspoons;
- ammonia - 1 teaspoon;
- any liquid detergent or pet shampoo - 1 teaspoon;
- baking soda - 2 teaspoons;
- water - 1 liter.
We process the fur with a solution with a brush. Then it should be thoroughly washed and dried.

2. It is advisable to protect the core, the lint-free side of the collar, from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar is more likely to tear.

3. Best Option – dye the fur a tone darker than he was before. But if your paint contains bleaching agents, then you can achieve the original color. Since fox fur is much thicker than the hair on a human head, we recommend stocking up with more than one tube of paint.

4. Now you can start for coloring the collar. We use the paint according to the instructions. In order for the coloring matter to be evenly distributed, it is better to moisten the fur with water beforehand. Work with gloves, apply the paint quickly, spread it over the fur with your hands - the main hair and downs should be thoroughly smeared.

5. At the end of the dyeing time, the fur is washed with plenty of water. After that, rinse the collar in a solution of vinegar. To rinse and add shine and volume to the fur, you can use hair conditioner instead of vinegar.

6. When our collar is rinsed, dry it gently with a towel.

7. In order for the collar not to shrink after dyeing, it must be dried on a flat surface, straightened well, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The inside will take the longest to dry, so before removing the fixing needles, make sure that the collar is dry on the inside side.

How to clean silver at home
Many women prefer silver jewelry because this meta...

How to clean gold at home with improvised means
Everyone loves gold jewelry, and women are just crazy about them. And u...

How to clean suede at home
Suede is a very demanding material, so it requires a certain...

How to clean the carpet at home folk remedies
In our world of new technologies, we are already accustomed to all kinds of services....

Light in the house - create comfort with the help of lighting
Do we always know the reason for our bad mood or fatigue? By...

A brand new mink fur coat or hat looks very attractive, but it is worth bringing the thing for several seasons, and the fur will lose its luster and its color will fade. If conventional cleaning methods are powerless, then it's time to paint the mink. But how to do that?

Caution and accuracy!

The best option is to use the services of professionals, since dyeing fur is a laborious and responsible process. When dyeing mink fur at home, there is always a risk of hopelessly spoiling the thing.

Well, if you are ready to take a chance, then experiment first with a piece of fur, which is sure to be attached to any mink product. This, of course, will take time, but you will get some confidence that you will not spoil an expensive thing (or make sure you do).

Methods for dyeing mink fur

Now in the store you can buy special sprays for painting fur. They make it possible to quickly and without much hassle to return things to their original appearance, but at the same time they have a number of disadvantages: in particular, any light-colored thing, upon contact with your fur coat, will acquire its color, and the color of the fur coat itself will fade again after a few months.

A more durable result is the use of hair dye: after all, the structure of mink fur is similar to the structure of a human hair. But you will need a good preparation from a reliable manufacturer, only in this case the staining will be successful. As for the shade, it is better to choose a paint tone darker than the natural color of the fur.

It is imperative to pre-clean the fur, otherwise the fat and dirt on it will not allow the pigment to penetrate deep into the pile, and the result of painting will be unstable. Degreasing can be done with sawdust or potato starch, which is simply sprinkled on the surface of the product and then shaken off.

Next, you should treat the mezdra on the reverse side with any greasy cream, which will prevent it from drying out. Now you can start preparing the composition, following the instructions that you will definitely find in the paint box.

Using a brush or toothbrush, evenly apply the prepared solution to slightly damp fur (use a spray bottle to moisten), and then walk with gloved hands over its entire surface so that no unpainted spots remain. We lay the fur in the direction of hair growth and wait: the exposure time of the coloring composition is about 3 hours.

Further, under warm water, the paint is removed using shampoo, the fur is treated with hair balm, washed thoroughly and rinsed in a solution of vinegar (a tablespoon per liter of water). Now it remains only to carefully remove the remaining moisture with a soft towel and once again apply a thin layer of glycerin or any greasy cream to the mezra.

Keep in mind that after painting the skin can sit down, so for the time of drying, the core must be pinned with buttons to a flat, solid base. Drying the fur is necessary when room temperature. If done correctly, after drying your mink should remain as soft and fluffy as it is, but with a more attractive, intense coloration.